TOA SX-2000AI เครื่องขยายเสียง Audio Input Unit
Description
The SX-2000AI is an audio intput of the matrix system. Multiple units can be decentralized in a whole system. It is equipped with eight audio outputs and two inputs which can be mixed and output. It is also equipped with eight control inputs, and eight control outputs. The SX-2000AO receives audio signals from the audio input unit via digital transmission, but an analog audio input function (1 channel) enables simultaneous all-zone calls for use in emergency situations. Audio output levels (post-fader levels) are indicated on the level meters provided for each output channel. Any output channel can be monitored using the internal speaker. It is equipped with an emergency audio input and a 24V emergency cutoff input. The SX-2000AO has two power inputs and can support a dual-redundant power supply system.
Specification
Power Source Usable power supply unit: VX-200PS – 24V DC (operational range: 20V – 40V DC) – Two power inputs construction enables dual- redundant power supply.
Current Consumption Under 2.01A (maximum value in the power operating range) – Under 1.50A (when operated on 24V DC) – Note: But except current consumption of the external equipment of which power is supplied from the unit.
Indication 18 alphanumeric characters, Level indication (8 inputs, monitor), Status indicators, Power indicator, Standby indicator, CPU OFF indicator
Operation Function button, Input level control, Monitor speaker volume control,ON/OFF switch, Operation button
Audio Input 8 inputs, module construction (max. 4 modules, modules optional) monitoring possible using built-in speaker.
Audio Input Characteristic Sampling frequency: 48kHz
No. of Connectable Remote Microphone Max. 4
Power Feed to Remote Microphone Possible for up to a total of 8A.
SX Link
Network I/F 2 100BASE-TX circuits, RJ45 connector, decentralized installation possible
Connection Cable/Device Shielded Category 5 twisted pair cable for LAN (CAT5-STP) To be connected via the switching hub specified by TOA Note: This network must be made physically independent from other LAN.
Maximum Cable Distance 100m (between this unit and a switching hub)
Analog Link
Input/Output Connector Input: 1 input, RJ45 connector Output: 1 output, RJ45 connector
Connection Cable Shielded Category 5 twisted pair cable for LAN (CAT5-STP)-(1 pair of audio wire + 1 pair of CPU OFF + 1 pair of control wire (system reset/standby) + 1 pair of connection check wire)
Maximum Cable Distance Total length of analog audio link: 800m
Control input 16 inputs, no-voltage make contact input, open voltage: 40V DC, short-circuit current: 2mA, photo coupler input, removable terminal block (16 pins)
Control Output 16 outputs, A contact: normally open (changeable to B contact: normally closed), no-voltage make contact output, relay contact output (withstand voltage: 40V DC. control current: 2 — 300mA), removable terminal block (16 pins)
Operating Temperature 0°C to +40°C
Operating Humidity 35% to 80% RH (no condensation)
Finish Panel: Aluminum, black, alumite, Case: Surface-treated steel plate
Dimensions 482 (W) × 88.4 (H) × 349 (D)mm
Weight 7.2kg
Accessory Removable terminal plug (4 pins) × 1, Removable terminal plug (16 pins) × 4, Rack mounting screw × 4
Option Remote microphone interface module: SX-200RM – MIC/LINE input module: D-921E, D-921F, D-922E, D-922F – Stereo input module: D-936R Note: Modules other than described above cannot be used.
