Behringer M-12 ลำโพง 12 " + HORN (1100 W / CLASS D)

The Milan M12 is a portable 12” two-way powered loudspeaker featuring two independent input 

channels, mic and line inputs, two band EQ, intelligent limiting, and a Mix Out function for 

connection to additional Milan loudspeakers for easy system expansion.

The Class-D amplifier is a two channel unit with an integrated electronic crossover, 

allowing the HF and LF drivers to be powered separately without one being able to 

influence the sound of the other. Total output power is 1,100 watts peak, providing plenty 

of headroom to maintain good dynamic range so that transient signals are delivered 

effortlessly. The lightweight switch-mode power supply coupled with industry leading 

Klark Teknik digital signal processing, providing dynamic equalisation and sophisticated 

limiting functions to ensure optimum performance and long term reliability.

The two discrete input channels are each equipped with balanced, combination jack/XLR 

connectors and a level control, catering for a range of music sources from low impedance 

microphones, acoustic guitars and keyboards to mp3 players and mixing consoles, 

selectable via a mic/line slide switch.

Common to both channels are bass and treble controls with ±6dB of cut or boost to allow 

the loudspeaker to be equalised to the venue. In addition, a low cut filter is provided at 

100Hz to shelve the low frequency response when used on the floor as a wedge monitor, 

or to ensure correct integration with subwoofers. A speech/music switch optimises the 

loudspeaker’s frequency response either for predominantly vocal material or for music 

programme. A Mix Out function sends the mix of both input channels post-EQ to 

additional Milan loudspeakers on a balanced male XLR for easy system expansion.

The trapezoidal enclosure is fabricated from high density polypropylene, and is 

extensively ribbed externally and internally to eliminate resonances and also to provide 

an attractive and durable cabinet finish. The symmetrical side angles allow the 

loudspeaker to be conveniently used as a floor monitor. A recessed grab handle on the 

top is designed for easy lifting and carrying, while the dual angle pole mount socket 

allows the loudspeaker to be mounted on straight poles or speaker stands either 

vertically, or raise higher and angled down to optimise audience coverage. A total of six 

M10 rigging points are provided on the top and bottom of the cabinet to enable vertical or 

horizontal suspension in permanent installations using M10 shoulder eyebolts.

Mains power is connected via a non-locking IEC receptacle with integrated fuseholder. 

The illuminated front badge can operate in one of three possible modes: permanently on; 

permanently off; or to indicate the action of limiting.