Electro-Voice ZX5-60PI ลำโพง 600-Watt, weatherized, permanent installation, 15" two-way loudspeaker system, integral stand mount, 60 X 60 horn, Black
The Electro-Voice Zx5-60pi is the new standard of no compromise audio performance and versatility in a simple to use, compact package. The Electro-Voice Zx5-60pi features a molded polymer enclosure that is inherently water resistant. The addition of a multilayer grille with hydrophobic cloth and a gland nut input connection completes it for a highly weather resistant system.
At its heart are the transducers. First is the DVX3150 high performance low frequency transducer. Electro-Voice used advanced computer aided design techniques to create forced air, directional voice coil cooling for high power and efficiency. Finite element analysis was used to optimize the suspension and magnetic structure for long, linear travel to provide low distortion and greater LF extension. These features and details, such as forged magnetic components and special materials, provide reliability with a 500W power rating in a lightweight transducer. Next is the ND2, a 2-inch voice coil compression driver based on neodymium motor structure to allow for maximum output while reducing size and weight to a minimum. Its precision phasing plug and titanium diaphragm provide better HF performance, while the integral heatsink provides cooling for high power output.
The high tech Electro-Voice Zx5-60pi enclosure uses injection-molded high-impact polypropylene structural foam to make the Electro-Voice Zx5-60pi incredibly durable. The enclosure geometry elements have been carefully designed to provide maximum rigidity and bass response. By design the Electro-Voice Zx5-60pi is also a perfect solution for stage monitors by allowing two angles (45° or 55°) without any additional accessories.
The Electro-Voice Zx5-60pi is equipped with two anchor plates for rigging with single studfittings, along with two more possible anchor plate attachment points on the bottom. For permanent suspension or attaching brackets, the Electro-Voice Zx5-60pi also has two M8 inserts on the top and bottom, two under the handle, and four on the back of the enclosure, for a total of 10.
Features:
- DVX3150 15” LF Transducer with Forced Air Cooling
- ND2 2” Voice Coil, 1” Exit Neodymium Compression Driver
- 60° x 60° Coverage Pattern
- 600W Continuous (2400W Peak) Power Handling (Passive Mode)
- 2 Conductor SJO Cable and Gland Nut
- High Sensitivity, 132 dB Maximum SPL
- Adjustable Monitor Angle (45° or 55°)
- All Weather IEC 529, IP44, & MIL810 Environmental Specs
- 3 Anchor Plates for Single Stud Fittings and 10 Integral Suspension Points
- Color : Black
SPECS:
|
Freq. Response (-3 dB):
|
......
|
58 Hz - 18 kHz |
Freq. Response (-10 dB): |
...... |
39 Hz - 20 kHz |
Rec HiPass Freq:
|
......
|
36 Hz |
Axial Sensitivity:
|
......
|
98 dB (1W/1m) |
Max SPL:
|
......
|
132 dB |
Horizontal Coverage:
|
......
|
60° |
Vertical Coverage:
|
......
|
60° |
Power Handling:
|
......
|
600W Continuous, 2,400W Peak |
LF Transducer: |
...... |
DVX3150, 15" Woofer Driver |
HF Transducer: |
...... |
ND2, 1-inch (25.4mm) Exit Neodymium Compression Driver |
Crossover Frequency: |
...... |
1.5 kHz
|
Nominal Impedance: |
...... |
8 Ohms |
Minimum Impedance: |
...... |
6.5 Ohms |
Connector: |
...... |
2 Conductor SJO Cable and Gland Nut |
Enclosure Material: |
...... |
Polypropolene Structural Foam |
Suspension: |
...... |
Enclosure has locations for 5 Single-Stud Attachment Plates and 10 Forged Steel Eyebolts - 2 on Top, 2 on Bottom, 2 on Side, and 4 on Rear of Enclosure |
Grille: |
...... |
Polyester Powder Coated, 16GA. Galvanized Steel |
Color: |
...... |
Black |
Environmental Specs: |
...... |
All Weather IEC 529, IP44, & MIL810 Environmental Specs |
Dim (H x W x D): |
...... |
27.26" x 17.57" x 16.16" (692 x 446 x 411 mm) |
Net Weight:: |
...... |
49 lbs (22.2 kg) |
Shipping Weight: |
...... |
57.4 lbs (26.0 kg) |