Model |
Di6 DCt |
Product Type |
Surface Mount Speaker |
Frequency Response (-3dB) |
75Hz -30kHz |
Frequency Range (-10dB) |
55Hz - 35kHz |
System Sensitivity (1W @1m) |
89dB (1W = 2.83V for 8 Ohms) |
Dispersion (-6dB) |
90 degrees conical |
Driver Complement |
Specifications |
Low Frequency |
1.00 x 165mm (6.50") Dual ConcentricTM constant directivity driver with multi fibre paper pulp co |
High Frequency |
25mm (1.00") titanium dome with neodymium magnet system |
Crossover |
1.6kHz - 2nd order LF, 2nd Order HF (with dynamic HF protection) |
Directivity Factor (Q) |
5.6 averaged 1kHz to 10kHz |
Directivity Index (DI) |
7 averaged 1kHz to 10kHz |
Rated Maximum SPL |
Average: 109dB (107dB - 60Wtapping on transformer) Peak: 115dB |
Power Handling |
Average: 90W Programme: 180W Peak: 360W |
Recommended Amplifier Power |
180W @ 8 Ohms |
Nominal Impedance |
8 Ohms |
Transformer Taps (bottom rotary switch) |
Specifications |
70V |
60W / 30W / 15W / 7.5W / OFF & low impedance operation |
100V |
60W / 30W / 15W / OFF & low impedance operation |
Distortion |
Specifications |
10% Full Power (8.0V) 250Hz 1kHz 10kHz |
2nd Harmonic: 1.00% 0.18% 1.00% 3rd Harmonic 0.32% 0.32% 0.18% |
1% Full Power (2.5V) 250Hz 1kHz 10kHz |
2nd Harmonic: 0.25% 0.06% 0.45% 3rd Harmonic 0.25% 0.18% 0.14% |
Construction |
Specifications |
Enclosure |
High Impact Polystyrene (HIPS) rated IP64 to EN60529 (IEC529) |
Grille |
Steel, with weather resistant coating |
Finish |
Textured Black or White paint |
Connectors |
Euroblock type removable locking connector with screw terminals with "loop through" facility |
Fittings |
1 x K-Ball™ Bracket Socket 2 x M8 yoke bracket inserts |
Supplied Accessories |
Yoke bracket |
Optional Accessories |
Pole mount adaptor, K-Ball™ pre-wired multi angle bracket |
NET Weight |
5.5kg (12.12 lbs) |
Dimensions |
357.5 x 230 x 223.2mm (H x W x D) (14.08 x 9.05 x 8.79”) (H x W x D) |