G9 G6 ลำโพง 6"+ 3/4" full-range 125w RMS
The G-6 is a small and well designed Quasi trapezoidal 6"+ 3/4" full-range loudspeaker cabinet. It has a built-in passive crossover, cast chassis drivers with a 60° x 60° Horn. The G-6 is excellent for zoning small audio area requirements and can be used as a small full-range PA, or even a baby floor monitor. A good partner for the G-6 is the G-212B bass cabinet. Its size and power lends itself to be used in a multitude of ways where space is restricted, but quality audio is required, and is a great choice for audio support in Theatres, pubs and clubs, or general audio zone installations.
The G-6 is fitted with the unique G-Phase passive crossover, ensuring not only the correct crossover point for excellent sound and speaker protection, but also places an accurate delay between the LF and HF drivers. This system allows the cabinet to sound natural, smooth and powerful, while ensuring that frequencies are not out of alignment.
The cabinet is made of quality 15mm Baltic plywood, rebated, screwed and glued for sound integrity and strength. Care and accuracy is put in to the shape and build, in order to give maximum SPL. The metal grille is 1.5mm carbon steel and the cabinet is sprayed with a strong protective textured black paint for true resilience. There are 5 x M10 threaded fixing points for installation, plus 4 x M6 standard bracket mounting points on the rear. Standard connectors are 2 x Speakon NL4MP recessed in to a back panel.
G-6 Specifications
Enclosure Type: |
2-way reflex loaded |
Enclosure Build: |
15mm Baltic Birch plywood, rebated, screwed & glued |
Frequency Response: |
100Hz-18kHz+/-3dB |
Sensitivity: |
91dB(1w/1m) |
Dispersion: |
60° x 60°
|
Power Handling: |
125w RMS/300w program |
Maximum SPL: |
115dB continuous 121dB peak |
Nominal Impedence: |
8 Ohms |
Drive Units: |
1 x 6.5"(165mm) LF cone drive unit
1 x 3/4"(19mm) HF compression drive unit
|
Crossover: |
G-Phase design |
Connectors |
2 x Speakon NL4MP |
Rigging & Suspension: |
5 x M10 threaded fixings + 4 x M6 for Omnimount
& Powerdrive fitting
|
Dimensions W x D x H mm: |
187mm x 180mm x 320mm |
Boxed size W x D x H mm: |
230mm x 223mm x 373mm |
Weight Net/Gross Shipping: |
6.5kg/7.05kg
|