TANNOY TS10 Sub 10" 300Watts RMS
The TS10 uses a substantially built 250mm (10.00”) down-firing drive unit, with an oversized magnet system, in an exceptionally sturdy and rigid cabinet ensuring extraordinary control of the drive unit and minimising unwanted cabinet resonance.
The massive roll surround that terminates the cone to the rigid driver chassis allows substantial cone excursion providing the necessary air movement to ensure very extended low frequency output.
Achieving the optimum settings for music or home cinema listening is easy. Low frequency extension can be varied from around 60Hz down to the unit’s lowest operating frequency via a control on the rear panel of the sub. This allows the subwoofer to be adjusted to match the relative level of the main speakers or just simply set to personal listening taste. Movies will have that floor shaking real home cinema power, and music will come alive with that bass dynamic you perhaps didn’t even realise was there.
The TS10 is ideally suited to medium sized home theatre systems, where it's tight and punchy low frequency performance will add real dynamism and impact to the whole movie experience.
Specifications
TS10 |
PERFORMANCE |
Peak output power |
300Watts RMS |
Low frequency response |
29Hz |
Inputs |
2 x line level phono, 2 x XLR balanced |
Input filter |
2nd order low pass, 50Hz - 150Hz, -6dB |
Auto mute |
After approximately 12 minutes in absence of input signal |
DRIVE UNITS |
Driver type |
250mm (10.00") |
CONSTRUCTION |
Enclosure type |
Closed box |
Volume |
16.75 litre / 0.6cu.ft |
Dimensions |
323 x 286 x 286 mm (12.75 x 11.30 x 11.30") |
Additional features |
Phase control, crossover, defeat switch for LFE operation, soft limiting to avoid overload, LF extension control |
Mains voltage |
120V nominal AC~, 60Hz, 230 nominal AC~, 50Hz |
Mains fuse |
120V - T3.15AL / 250V, 230V - T1.6AL / 250V |
Weight |
9.5kg / 21lbs |
Finish |
Grey |