TELEVIC ODCSL5500 Delegate channel selector with OLED displaying channel number, name and volume bar
The ODCSL5500 Digital Conferencing Flush Delegate Channel Selector w/ OLED Display is part of the TCS 5500 Digital Conference System. It allows delegates to select the appropriate language channel for listening with the up and down controls. This selection is automatically limited to the number of available channels. An easy-to-read OLED display indicates the selected channel number and the volume level when the volume controls are used. Using the PC software, names (i.e. ISO language codes) can be assigned to the different channels and displayed on the display. The channel selector remains inactive until the volume or channel selection controls are first used. The language selector is by default set to the floor channel (or another predefined channel), and the volume is automatically set to a predefined level.
- 8-pin shielded modular RJ45 jack
- 3.5 mm jack connector for headphones
- Automatic activation upon first use with preset channel selection and volume level
- Easy to read OLED display shows the selected channel number, its corresponding name and volume bar
- Easily readable even in a darkened conference room
- Up and down controls for channel selection and volume control
Specification |
ODCSL5500 |
Physical |
Height |
1.97 in. (50 mm) |
Width |
5.32 in (135 mm) |
Cut-out Height |
1.69 in. (43 mm) |
Cut-out Width |
4.72 in. (120 mm) |
Weight |
0.2 lbs. (91 g) |
Material |
Steel |
Shipping Weight |
1.0 lbs. (0.5 kg) |
|
Controls |
Headphone Volume |
Volume raise and lower button labeled with "" and "". Used to control the headset volume output. |
Channel Select |
Channel up and down buttons labeled with "" and "". Used to control the channel output. |
|
Indicators |
OLED |
Display for channel selector and volume control |
|
Interconnections |
RJ45 |
Two (2) RJ45 ports, screened with auto-termination |
Headphone Connector |
3.5 mm (0.14 in.) stereo headphone connector |
|