Connectors
• Power/RS-485, I/O (I/O, 5Vout,GND) and service
interface on spring contact connector blocks for
wires AWG 28 – AWG 16 / 0.08 – 1.3 mm²
Inputs / Outputs
• 8 I/O's (usage and power-on preset configurable
over RS-485) on spring contact connector block
for wires AWG 28 – AWG 16 / 0.08 – 1.3 mm²
• Inputs with internal 10 kOhm pull-up
• Max total 5 Vout & outputs current @ (V supply):
24 mA (30 VDC), 32 mA (24 VDC), 85 mA
(12 VDC)
RS-485 / Protocol
• RS-485 (2-wire), 9'600/19'200 Baud , 8 bit, Even/No
parity software configurable, Modbus/RTU protocol
|
Misc
• 1 LED for power indication
• 1 LED for RS-485 active send indication
• 2 LED for internal status indication
• External connector for default settings jumper
Power supply requirements
• 12 to 24 VAC / 9 to 30 VDC, 1 Watt max.
Case
• high quality plastic, 33 g, Ø 2" (2.75" mounting )
h 0.9"/ Ø 51 mm (70 mm mounting) h 23 mm
MTBF
• Min. 590 000h acc. to MIL217F at 25°C
ambient temperature
|