Audio Technica AT3035 คอนเดนเซอร์ไมโครโฟน Cardioid Condenser Microphone  

AT3035 Cardioid Condenser Microphone

Designed for critical home/project/professional studio applications and live performance, this 30 Series large-diaphragm side-address cardioid condenser delivers exceptional detail and low noise. With its extended low-frequency response, the AT3035 produces rich, full sound reproduction and handles extremely high sound pressure levels with ease. Tailored for a smooth, natural sound, this mic is a perfect complement for digital recording equipment. Along with its rugged construction and high-performance specifications, the AT3035 provides an exceptional level of consistency from model to model. Custom-engineered large diaphragm for exceptional detail and low noise   Cardioid polar pattern reduces pickup of sounds from the sides and rear, improving isolation of desired sound source   High max SPL, wide dynamic range and optimized output level provide unmatched versatility   Low self-noise (12 dB SPL) – perfectly suited for today's most sophisticated digital recording equipment   Extended low-frequency response for rich, full sound   State-of-the-art surface-mount electronics ensure compliance with A-T's stringent consistency and reliability standards   Custom shock mount provides superior isolation   Lo-cut switch (80 Hz, 12 dB/octave) and 10 dB pad

Specifications   Download PDF:     - AT3035 Specification Sheet (PDF 73.53 KB) - 30 Series Brochure (PDF 313.84 KB)         Register this product now

SPECIFICATIONS   ELEMENT Fixed-charge back plate, permanently polarized condenser POLAR PATTERN Cardioid FREQUENCY RESPONSE 20-20,000 Hz LOW FREQUENCY ROLL-OFF 80 Hz, 12 dB/octave OPEN CIRCUIT SENSITIVITY -32 dB (25.1 mV) re 1V at 1 Pa IMPEDANCE 250 ohms MAXIMUM INPUT SOUND LEVEL 148 dB SPL, 1 kHz at 1% T.H.D.; 158 dB SPL, with 10 dB pad (nominal) NOISE 12 dB SPL DYNAMIC RANGE (typical) 136 dB, 1 kHz at Max SPL SIGNAL-TO-NOISE RATIO 82 dB, 1 kHz at 1 Pa PHANTOM POWER REQUIREMENTS 11-52V DC, 3 mA typical SWITCHES Flat, roll-off; 10 dB pad (nominal) WEIGHT 13.8 oz (390 g) DIMENSIONS 6.69" (170.0 mm) long, 2.05" (52.0 mm) maximum body diameter OUTPUT CONNECTOR Integral 3-pin XLRM-type ACCESSORIES FURNISHED AT8458 shock mount for 5/8"-27 threaded stands; soft protective pouch AUDIO-TECHNICA CASE STYLE R5