Shure KSM141/SL คอนเดนเซอร์ไมโครโฟน ไมโครโฟนสำหรับเครื่องดนตรี Dual-Pattern Instrument Microphone
SHURE KSM 141/SL Dual-Pattern Instrument Microphone
คอนเดนเซอร์ไมโครโฟน ไมโครโฟนรุ่นนี้เหมาะสำหรับรับเสียงเครื่องดนตรี เป็นรุ่นพิเศษที่สามารถเลือกปรับทิศทางการรับเสียงได้ สามารถเลือกทิศทางการรับเสียงได้ 2 แบบ คือ Cardioid และ Omnidirectional ตอบสนองความถี่ที่ 20Hz-20kHz Diaphragms แบบ Ultra-Thin Mylor เคลือบผิวด้วยทอง 24K หนา 2.5 Micron พร้อมภาคขยายสัญญาณไมโครโฟน แบบ Transformerless มีสวิตซ์ Low Frequency Filter แบบ 3 ระดับ และสวิตซ์ 15dB/25dB Attenuation
KSM 141/SL Dual-Pattern Instrument Microphone condenser
Recommended Uses
- Studio Ensemble
- Studio Instrument
- Orchestra/Strings
- Woodwinds
- Acoustic Guitar
- Acoustic Bass
- Guitar Amp
- Piano/Organ
- Cymbals
- Percussion
- Live Stereo Recording
KSM141/SL Includes windscreen, carry case, champagne finish
The KSM141 is a dual-pattern end-addressed condenser microphone with a rotating collar, allowing easy switching between a consistent cardioid or true omnidirectional polar pattern for smooth and extremely focused sound reproduction.
Designed for studio use, yet rugged enough for live applications, the KSM141 can withstand extremely high sound pressure levels (SPL). Its low self-noise and extended frequency response make it ideal for recording musical instruments.
FEATURES
- A mechanical polar pattern switch for highly consistent cardioid and true omnidirectional polar patterns. Provides flexibility in a wide variety of recording applications
- Ultra-thin, 2.5 micron, 24 karat gold-layered, low mass Mylar® diaphragm for superior transient response
- Class A, discrete, transformerless preamplifier for transparency, extremely fast transient response, no crossover distortion, and minimal harmonic and intermodulation distortion
- Premium electronic components, including gold-plated internal and external connectors
- Subsonic filter eliminates low frequency rumble (less than 17 Hz) caused by mechanical vibration
- Three-position switchable pad (0 dB, 15 dB, and 25 dB) for handling extremely high sound pressure levels (SPLs)
- Three-position switchable low-frequency filter to reduce background noise and counteract proximity effect
Performance Characteristics
- Extended frequency response
- Low self-noise
- Exceptional reproduction of low-frequency sounds
- Can withstand high sound pressure levels (SPL)
- High output level
- No crossover distortion
- Uniform polar response
- Superior common mode rejection and suppression of radio frequency interference
Applications
Some typical applications for the KSM141 are listed below. Microphone use, however, is a matter of personal taste. The KSM141 may be used for a variety of applications other than those listed.
- Acoustic instruments -- such as piano, guitar, drums, percussion, strings
- Wind instruments -- brass and woodwind
- Low frequency instruments -- such as double bass, electric bass, kick drum
- Overhead miking -- drums or percussion
- Ensembles -- choral or orchestral
- Room ambiance pick-up -- guitar amplifier or drums
Both the acoustic environment and microphone placement strongly affect the sound obtained from miking a source. You may need to experiment with microphone placement and room treatments to achieve the best overall sound for each application.
SPECIFICATIONS
- Cartridge Type
Permanently Biased Condenser
- Frequency Response
20 to 20,000 Hz
- Directional Polar Pattern
Cardioid/Omnidirectional
- Output Impedance
150 ohms (actual)
- Attenuation Switch
0 dB, 15 dB, or 25 dB attenuation
- Low Frequency Response Switch
Flat; -6 db/octave below 115 Hz
-18 dB/octave below 80 Hz
- Phantom Power
48 Vdc +/- 4 Vdc (IEC26815/DIN 45 596), positive pins 2 and 3
- Current Drain
4.65 mA typical at 48 Vdc
- Common Mode Rejection
>50 dB, 20 Hz to 20 kHz
- Polarity
Positive pressure on diaphragm produces positive voltage on output pin 2 relative to pin 3
- Dimensions and Weight
20 mm (0.8 in.) diameter, 146 mm (5.75 in.) long
156 grams (5.5 oz.)
- Sensitivity (typical, at 1000 Hz; 1 Pa = 94 dB SPL)
-37 dBV/Pa
- Selfnoise (typical, equivalent SPL; A-weighted, IEC 651)
14 dB
- Maximum SPL
5000 ohm load (Attenuator on): 145 (160, 170) dB
2500 ohm load (Attenuator on): 139 (154, 164) dB
1000 ohm load (Attenuator on): 134 (149, 159) dB
- Output Clipping Level*
5000 ohm load: 15 dBV
2500 ohm load: 9 dBV
1000 ohm load: 3 dBV
- *20 Hz to 20 kHz; THD < 1%. THD of the microphone preamplifier when applied input signal is equivalent to the cartridge output at specified SPL.
- Dynamic Range
5000 ohm load: 131 dB
2500 ohm load: 125 dB
1000 ohm load: 120 dB
- Signal to Noise Ratio**
80 dB
- **S/N ratio is difference between 94 dB SPL and equivalent SPL of self-noise A-weighted.
Dual-Pattern Instrument Microphone
End-address condenser microphone with mechanically switching dual polar patterns.
- Available Options
-
KSM141/SL |
Includes windscreen, carry case, champagne finish |
KSM141/SL STEREO |
Includes two KSM141, two foam windscreens, A27M Stereo Microphone Adapter, carry case |
The KSM141 is a dual-pattern end-addressed condenser microphone with a rotating collar, allowing easy switching between a consistent cardioid or true omnidirectional polar pattern for smooth and extremely focused sound reproduction.
Designed for studio use, yet rugged enough for live applications, the KSM141 can withstand extremely high sound pressure levels (SPL). Its low self-noise and extended frequency response make it ideal for recording musical instruments.