CROWN CTS8200AUSPCN 8 Channel Power Amplifier with USP3CN Module

Crown’s CTs Series amplifiers provide exceptional performance, flexibility and value for installed sound applications. CTs Series amplifiers feature independent selection of high and low impedance operation for a specific channel, plus power levels and features that were carefully chosen to match the requirements of fixed install design. Easy integration with HiQnet™ and CobraNet™ allows CTs amplifiers to deliver a comprehensive lineup of monitoring and control features along with digital audio transport for an award-winning digital audio solution.

Features:

• High power density in a 3RU chassis
• Crown Switching Power Supply for lighter weight
• Selectable "Constant-Voltage" or low-impedance (4/8 ohm) operation per channel on 2-channel models, and per channel-pair on 4-and 8-channel models
• 100V direct outputs
• Legendary Crown class-I (BCA) and AB+B output topologies offer the best in amplifier reliability
• 4- and 8-channel models offer perfect independent power solutions for multi-zoned systems· "FIT" (Fault Isolation Topology) circuitry on 4- and 8-channel models isolates fault conditions without affecting neighboring channels
• Comprehensive array of indicators provide accurate diagnostics
• Multi-channel models accept MC accessory modules

Specifications:

• Frequency Response (at 1 watt, 20 Hz - 20 kHz): ± 0.5 dB
• Phase Response (at 1 watt, 10 Hz - 20 kHz): ± 35°
• Signal to Noise Ratio below rated power (20 Hz to 20 kHz): 100 dB unweighted
• Total Harmonic Distortion (THD) at 1 watt, from 20 Hz to 20 kHz: < 0.05%
• Intermodulation Distortion (IMD) 60 Hz and 7 kHz at 4:1, from 163 milliwatts to full bandwidth power, typical: < 0.05%
• Damping Factor: 10 Hz to 400 Hz: >180
• Crosstalk (below rated power, 20 Hz to 1 kHz): > 80 dB
• Common Mode Rejection (CMR) (20 Hz to 1 kHz): > 50 dB
• DC Output Offset (Shorted input): < ± 5 mV
• Input Impedance nominally balanced, nominally unbalanced: 20 kilohms, 10 kilohms
• Maximum Input Level (before input compression): + 20 dBu
• Load Impedance (Note: safe with all types of loads)
    -  Stereo: 4/8 and 25 ohms (70V)
    -  Bridge Mono: 8/16 and 50 ohms (100V)
• Voltage Gain (at maximum level setting), 1.4V sensitivity
    -  4/8 Ohm Operation: 20:1 (26 dB)
    -  70V Operation: 50:1 (34 dB)
    -  100V Operation: 71.4:1 (37 dB)
• Required AC Mains: 100V, 50/60 Hz. 120V, 60Hz, 220/230/240V, 50Hz
• Power Draw at Idle (120 VAC mains, all channels in 4/8 ohm mode): 70W
• Power Draw at Idle (120 VAC mains, all channels in 70V mode): 114W
• Cooling: Continuously variable speed forced air, front-to-back airflow
• Dimensions (WxHxD): 19" x 5.25" x 16.25"
• Net Weight: 36 lb. 6 oz. (16.5 kg.)
• Shipping Weight: 47 lb. (21.3) kg