TANNOY TS 10 ลำโพง Powered Studio Subwoofer
Whether you're mixing a dubstep masterpiece, or just taking in a movie, you're not getting the full picture if you aren't pairing your full-range speakers with a powerful subwoofer. Perfect for home theater or professional studio applications, Tannoy's TS10 active subwoofer delivers frequencies down to 29 Hz in an exceptionally sturdy, compact enclosure.
The Sublime Sub
As a name synonymous with sound amplification in Great Britain and beyond, Tannoy knows a thing or two about building speakers. The TS10's long-throw 10-inch driver fires downward, while Tannoy's patented high-efficiency amplifier dedicates 300 watts to low frequencies -- more than enough power to reproduce deep music and booming sound effects.
It's all encased in a rigid, closed-box cabinet that minimizes unwanted resonance, with plenty of room for the cone excursion necessary to producing very low frequencies. Plus, Tannoy's included screw-on spiked feet isolate your TS10 from a carpeted floor, and you can invert the spikes to sit flat for use on your wooden floor, eliminating disruptive resonant coupling.
Sub-Specific Electronics
Whether you choose to pair your sub with full-range stereo monitors, or use it as the "point 1" in a 5.1 surround system, the Tannoy TS10 can integrate seamlessly into your setup. Just plug in a full-range source to the stereo XLR or 1/4-inch TRS jacks, and a second-order low-pass filter smoothly attenuates everything above the frequency you specify, from 50 to 150 Hz. Or, hit the crossover defeat switch to bypass this filter when sending a LFE-only (low-frequency effects) signal from your AV processor.
When using the XLR inputs with a balanced system, the TS10 also sends out a line-level feed via stereo XLR outputs, for you to plug into the main speaker pair. Toggle the 80 Hz hi-pass filter if you're using smaller main speakers, or go direct to send an unprocessed signal to larger mains. The TS10 also houses a built-in soft limiter to avoid overloading, and Auto mode lets your TS10 "sleep" after 12 minutes of inactivity. No matter what your system looks like, setting up a TS10 sub is a snap.
Specs.
- Performance:- Peak output power: 300Watts RMS- Low frequency response: 29Hz- Inputs: 2 x line level phono, 2 x XLR balanced- Input filter: 2nd order low pass, 50Hz - 150Hz, -6dB- Auto mute: After approximately 12 minutes in absence of input signal- Drive Units:- Driver type: 250mm (10")- Construction:- Enclosure type: Closed box- Volume: 16.75 litre / 0.6cu.ft- Mains voltage: 120V nominal AC~, 60Hz, 230 nominal AC~, 50Hz- Mains fuse: 120V - T3.15AL / 250V, 230V - T1.6AL / 250V- Finish: Grey- Dimensions: 323 x 286 x 286 mm (12 11/8 x 11.3 x 11 5/16 inches)- Weight: 9.5kg / 21lbs