TANNOY VQ 60 ลำโพง Reinforcement Speakers
The VQ 60 is a full range, three-way loudspeaker system designed for applications which require very high output capability with class leading pattern control. The VQ 60 is perfectly suited for use in arrays or singly in demanding music or speech applications. Unlike line array solutions, the VQ 60 can produce enough power and clarity to be used individually maintaining your building's aesthetics.
With low frequency extension to 90Hz, the VQ 60 can be combined with various subwoofers for extended bandwidth. The VQ 60 can be configured for use in Bi-Amp or Tri-Amp mode, in conjunction with a suitable digital signal processor (DSP).
Technical Information
VQ 60
PERFORMANCE
System Type 3-Way Full Range - Point Source
Frequency Response (-3dB) 1 115Hz - 23kHz
Frequency Range (-10dB) 1 90Hz - 27kHz
Operating Modes Bi-Amp (LF,MF/HF) User Configurable
Tri-Amp (LF, MF,HF) User Configurable
System Sensitivity & Operating Freq. (1W @1m) 2
BI-AMP
LF (80Hz - 450Hz) 105dB (2.0V @ 4ohms)
Passive MF/HF (450Hz - 23kHz) 115dB (2.83V @ 8ohms)
TRI-AMP
LF (80Hz - 450Hz) 105dB (2.0V @ 4ohms)
MF (450Hz - 7kHz) 115dB (2.83V @ 8ohms)
HF (7kHz - 23kHz) 115dB (2.83V @ 8ohms)
Dispersion (-6dB) 60 degrees conical
DRIVER COMPLEMENT
LF 2 x 300mm (12.00”) Low Frequency Transducers, Semi Horn Loaded
MF/HF Dual Concentric™ Compression driver loaded into a single PSW™ Waveguide
Crossover Frequency Biamp - 450Hz (active) 7kHz (passive)
Tri-amp 450Hz, 7kHz (active)
Directivity Factor (Q) 21.2 averaged 1kHz to 10kHz
Directivity Index (DI) 13.3 averaged 1kHz to 10kHz
RATED MAXIMUM SPL 2
LF 135dB (average) 141dB (peak)
MF 138dB (average) 144dB (peak)
HF 135dB (average) 141dB (peak)
Passive MF/HF 138dB (average) 144dB (peak)
Power Handling 3 Average Programme
LF @ 4ohms 1000W (63.3V) 2000W
MF @ 8ohms 200W (40V) 400W
HF @ 8ohms 90W (27V) 180W
Passive MF/HF @ 8 ohms 200W (40V) 400W
RECOMMENDED AMPLIFIER POWER
LF 2000W into 4ohms
MF 400W into 8ohms
HF 200W into 8ohms
Passive MF/HF 400W into 8ohms
NOMINAL IMPEDANCE
LF 4ohms (4.1 ohms Minimum)
MF 8ohms (7.0 ohms Minimum)
HF 8ohms (8.7 ohms Minimum)
DISTORTION
10% Full Power 2nd Harmonic 3rd Harmonic
250Hz TBA
1kHz TBA
10kHz TBA
DISTORTION
1% Full Power 2nd Harmonic 3rd Harmonic
250Hz TBA
1kHz TBA
10kHz TBA
CONSTRUCTION
Enclosure 18mm (0.71") birch plywood. Vented and internally braced.
Finish Textured black or white paint
(custom colours on request).
Powder coated perforated steel grille.
Connectors Barrier Strip
Fittings 8 x Recessed carrying handles
12 x M10 flying inserts
Dimensions 925mm x 694mm x 515mm
(36.42" x 27.32" x 20.28")
Weight 77kg (177.1 lbs)