Turbosound MILAN M-10 ตู้ลำโพงพร้อมขยายเสียง, Self-powered 2-way 10"+1" loudspeaker 230 watts, 119dB
- ลำโพงพร้อมเครื่องขยายเสียง, Self-powered
- Separate HF and LF amplifiers
- ช่องต่อไมโครโฟนและช่องสัญญาณแบบไลด์ Mic and line inputs
- ปุ่มปรับเสียงต่ำและเสียงสูง, Bass and treble EQ controls
- ปุ่มปรับแบบมิกเซอร์, Mix Out function
- สามารถใช้เป็นตู้มอนิเตอร์บนเวทีได้, Use as a floor monitor
- Injection moulded enclosure
- มีจุดเสียบเสาตั้งขาตั้งได้ 2 แบบ ตั้งตรงและก้มหน้า, Dual angle pole holder
- มีจุดน๊อด M10 สำหรับงานแขวนติดตั้ง, M10 rigging points
The Milan Mi0 is a compact trapezoidal self-powered two-way loudspeaker enclosure consisting of a 10" reflex-loaded low frequency driver and a 1" high frequency compression driver on a 90°H x 60°V dispersion HF horn in an optimally tuned injection-moulded enclosure, together with an integrated two-channel amplifier module.
The integrated amplifier is a two channel unit - the Class D low frequency section delivering 180 watts while the Class AB high frequency section delivers 50 watts - which provides a balanced XLR microphone input and balanced line input on a jack/XLR connector with individual level controls, as well as overall bass and treble tone controls.
A balanced male XLR output provides a line level mix-out signal to additional powered Milan enclosures. Mains power is supplied via an IEC mains connector with integrated fuseholder. The trapezoidal cabinet is constructed from gas-injected polypropylene, self-coloured in blue/black, with a powder-coated perforated galvanised steel mesh grille, and the symmetrical 43° angled sides enable use as a wedge monitor. A dual-angle pole mount socket is fitted, and a recessed flush handle is provided on the top. Rigging points are provided on the top and bottom to enable vertical or horizontal suspension in permanent installations using M10 eyebolts.
Net Weight |
11.89kg (26.2lbs) |
Dimensions |
521.5mm x 329.5mm x 294mm (20.5" x 13" x 11.6") |
Components |
1 x 10" (254mm) LF driver, 1 x 1" (25mm) HF compression driver |
Frequency Response |
55Hz - 22kHz ±3dB |
Dispersion |
90°H x 60°V @ -6dB points |
Maximum SPL |
119dB continuous, 125dB peak |
Construction |
Injection-moulded polypropylene enclosure. Self-coloured in blue/black. Recessed carrying handle. Integral dual angle pole mount socket |
Grille |
Powder coated perforated galvanised steel mesh |
Connectors |
Mic input: XLR female, wired pin 2 hot; Line input: Jack/XLR, wired pin 2 hot; Mix out: XLR male, wired pin 2 hot; IEC mains connector with integrated fuseholder |
Flying Hardware |
(6) M10 internal threaded rigging points |
Spares & Accessories |
LS-1029.2 10" (254mm) LF loudspeaker
RC-1029 Recone kit
CD-122 1" (25mm) HF compression driver
RD-122 Replacement HF diaphragm
PA-90 Speaker pole 90cm
PB-55 Wall bracket, pole mount fixing
EB-10 M10 shoulder eyebolt |