Model |
VNET 215HL |
Part Number |
8001 5350 |
Product Type |
Horn Loaded Subwoofer |
System Type |
Subwoofer - Horn loaded |
Frequency Response ( /-3dB) 1 |
48Hz - 350Hz |
Frequency Range (-10dB) 1 |
40Hz - 450Hz |
Rated Maximum SPL 2 |
140dB (average), 146dB (peak) |
Driver Complement |
2 x 380mm (15”) Bass drivers |
Crossover (DSP Generated) |
Variable low pass filter |
Distortion |
Specifications |
10% Full Power (28.3V) |
2nd Harmonic, 3rd Harmonic |
40Hz |
2nd Harmonic : 1.15% , 3rd Harmonic : 2.72% |
100Hz |
2nd Harmonic :2.03%, 3rd Harmonic : 3.30% |
1% Full Power (8.94V) |
2nd Harmonic, 3rd Harmonic |
40Hz |
2nd Harmonic : 0.30%, 3rd Harmonic : 3.12% |
100Hz |
2nd Harmonic : 0.88%, 3rd Harmonic : 1.92% |
Construction |
Specifications |
Enclosure |
500 litres, 18mm (5/8”) birch plywood internally braced. |
Finish |
Textured Black Paint, Powder coated steel grille |
Connectors |
1 x female XLR (input), 1 x male XLR (link), 1 x RJ45 (network in) |
Connectors |
1x RJ45 (netwirk link), 2 x Neutrik Powercon (1 AC input, 1 AC loop) |
Controls & Indicators |
LED on front of cabinet behind grill. (wink indicator for locating & assigning), Power LED (Blue) |
Controls & Indicators |
Signal LED (Green), Limit LED (Red), User DSP - defeat switch, Power Switch |
Fittings |
14 x Recessed carrying handles, 16 x M10 flying inserts |
Fittings |
4 x Pullback points, 4 x Rubber feet |
Electronics |
Specifications |
Efficiency |
>85% typically |
Damping Factor |
120 ref 8W |
Distortion |
<0.05% @ 1kHz -3dB output (22kHz bandwidth) |
Input Impedance |
5.6kWunbalanced, 11.2kW balanced |
Output Power (Programme) |
2500W |
Input Sensitivity |
1.4V ( 5.5dBu) |
System Type |
Dual channel Class D (Bridged) |
DSP system |
Specifications |
Comms Facilities |
Firmware updatable and selected parameters editable |
Communications |
Serial - RS485 Proprietary message format |
Dynamic Range |
112dB(A) typical |
DSP |
3rd generation SHARC |
Sampling Frequency |
96kHz 24 bit A/D-D/A word length |
Format |
1 IN - 1 OUT |
PSU |
Specifications |
Input Connector |
Locking Neutrik Powercon |
Voltage Selection |
Automatic (115 / 230V, 45 - 65Hz) |
Type |
High current, high freq. switch-mode |
Efficiency |
>90% typical |
Input voltage |
100v / 115v / 230v nominal /-10% |
Mains fuse |
External |
Fuse type |
T10AT |
Other features |
Automatic soft-start |
Current Draw (Idle @ 230V |
0.6 Amps |
Current Draw (Max @ 230V) |
4.5 Amps |
Dimensions |
700mm(H) x 1050mm(W) x 850mm(D) (27.56“(H) x 41.34 ”(W) x 33.46”(D)) |
Net Weight |
246.7lbs (112kg) |
Shipping Weight |
280lbs (127kg) |