Model |
VNET 218DR |
Part Number |
8001 5340 |
Product Type |
Direct Radiating Dual 18” Subwoofer |
System Type |
Subwoofer - Direct Radiator |
Frequency Response (+/-3dB) ¹ |
31Hz - 600Hz |
Frequency Range (-10dB) ¹ |
24Hz - 1.5kHz |
Rated Maximum SPL ² |
Average-137dB, Peak-143dB |
Driver Complement |
2 x 458mm (18”) Bass driver |
Crossover(DSP Generated) |
Variable low pass filter |
Distortion |
Specifications |
10% Full Power (28.3V) |
2nd Harmonic, 3rd Harmonic |
40Hz |
2nd Harmonic : 0.26%, 3rd Harmonic : 0.92% |
100Hz |
2nd Harmonic : 0.29%, 3rd Harmonic : 0.27% |
1% Full Power (8.9V) |
2nd Harmonic, 3rd Harmonic |
40Hz |
2nd Harmonic : 0.13%, 3rd Harmonic : 0.23% |
100Hz |
2nd Harmonic : 0.16%, 3rd Harmonic : 0.19% |
Construction |
Specifications |
Construction |
500 litres, 18mm (5/8”) birch plywood internally braced. |
Finish |
Textured black or white paint (custom colours on request). Powder coated steel grille |
Connectors |
1 x female XLR (input) 1 x male XLR (link) 1 x RJ45 (network in) |
Connectors |
1x RJ45 (network link) 1 x Neutrik Powercon |
Controls & Indicators |
LED on front of cabinet behind grill. (wink indicator for locating & assigning) Power LED (Blue) |
Controls & Indicators |
Signal LED (Green) Limit LED (Red) User DSP - defeat switch Power Switch |
Fittings |
16 x Recessed carrying handles 16 x M10 flying inserts. 4 x Pullback points 4 x Rubber feet |
Electronics |
Specifications |
Efficiency |
>85% typically |
Damping Factor |
120 ref 8 ohms |
Distortion |
<0.05% @ 1kHz -3dB output (22kHz bandwidth) |
Input Impedance |
5.6k Ohms unbalanced, 11.2k Ohms balanced |
Output Power (Programme) |
2500W |
Input Sensitivity |
1.4V (+5.5dBu) |
System Type |
Dual channel Class D (Bridged) |
DSP System |
Specifications |
Comms Facilities |
Firmware updatable and selected parameters editable |
Communications |
Serial - RS485 Proprietary message format |
Dynamic Range |
112dB(A) typical |
DSP |
3rd generation SHARC |
3rd generation SHARC |
96kHz 24 bit A/D-D/A word length |
Format |
1 IN - 1 OUT |
PSU Specifications |
Specifications |
Input Connector |
Locking Neutrik Powercon |
Voltage Selection |
Automatic (115 / 230V, 45 - 65Hz) |
Type |
High current, high freq. switch-mode |
Efficiency |
>90% typical |
Input voltage |
100v / 115v / 230v nominal +/-10% |
Mains fuse |
External |
Fuse type |
T10AT |
Other features |
Automatic soft-start |
Current Draw (Idle @ 230v) |
0.6 Amps |
Current Draw (Max @ 230v) |
4.5 Amps |
Dimesions |
700mm(H) x 1050mm(W) x 850mm(D) 27.56“(H) x 41.34 ”(W) x 33.46”(D) |
Weight |
110kg (232lbs) net 120kg (275lbs) shipping |