BIAMP PA-2 2-channel power amplifier output card
PA-2 amplifier cards allow AudiaFLEX to directly power 4, 6, or 8 ohm speakers. The output power is software configurable from 5 to 30 watts dual-channel and from 10 to 60 watts mono-bridged. An upgraded AudiaFLEX power supply provides a total of 120 watts of power, for up to twelve PA-2 cards.
Product Features
- Integrates seamlessly into AudiaFLEX
- Each card provides two amplifier channels
- Each card can be configured for mono-bridge
- Belectable power output ratings
- Manual or automatic load impedance selection
- Load and thermal fault monitoring
- Invert function allows 180° signal polarity reversal
- Selectable clip-limiter function
- Peak output indicator
- RoHS compliance and AES grounding practices
- Covered by Biamp Systems' five-year warranty
Product Specifications
- Output Power (selectable @ 8, 6, or 4 ohms): 2 x 5 watts, 2 x 10 watts, 2 x 20 watts, 2 x 30 watts, 1 x 10 watts, 1 x 20 watts, 1 x 30 watts, 1 x 40 watts and 1 x 60 watts
- THD+N (20Hz~20kHz @ +4dBu): < 0.35%
- Signal-to-Noise: > 89dB
- Crosstalk (at 1kHz): < -70dB
- Frequency Response (20Hz / 20kHz) individual channel: 8 ohm: -0.25dB / +1dB. 6 ohm: -0.25dB / +0.25dB. 4 ohm: -0.25dB / -1.5dB
- Frequency Response (20Hz / 20kHz) mono-bridged: 8 ohm: -0.25dB / +2.2dB. 6 ohm: -0.25dB / +1.8dB. 4 ohm: -0.25dB / +0.9dB
|
