BIAMP IP-2 2-channel mic/line input card

IP-2 input cards allow each AudiaFLEX installation to have the quantity and type of inputs required. Each IP-2 Card provides two channels of mic/line input, as part of AudiaFLEX hardware. Inputs are balanced, and are provided on plug-in barrier strip connectors. Software control of individual inputs includes: gain w/ peak indication; +48V phantom power; mute; level; and signal invert.

Product Features

• Each cards provides two mic/line input channels
• Integrates seamlessly into AudiaFLEX systems
• Balanced inputs on plug-in barrier strip connectors
• 0~66dB gain range for microphone or line sources
• Input peak indication provides 6dB of headroom
• +48V phantom power for condenser microphones
• -100~+12dB level fader range for volume control
• Invert function allows 180° signal polarity reversal
• RoHS compliance and AES grounding practices
• Covered by Biamp Systems' five-year warranty

Prodcut Specifications

• Frequency Response (20Hz~20kHz @ +4dBu): +0/-0.4dB
• THD +N (20Hz~20kHz @ +4dBu): line level (0dB gain): < 0.006%. mic level (54dB gain):  < 0.04%
• Equivalent Input Noise (20Hz~20kHz, 66dB gain, 150 ohm): -125dBu
• Dynamic Range (20Hz~20kHz, 0dB): > 108dB
• Maximum Gain (input channels): 66dB
• Input Impedance (mic/line balanced): 8k ohms
• Maximum Input (mic/line): +24dBu
• Crosstalk (channel-to-channel @ 1kHz): line level: < -80dB. mic level: < -75dB
• Phantom Power: +48 VDC (7mA/input)
• Input Gain Range (variable trim): 0dB ~ +66dB
• Sampling Rate: 48kHz
• A/D Converters: 24-bit