dot
dot


  [Help]
dot
รับบัตร Visa Master
bulletราคาไม่รวมภาษีมูลค่าเพิ่ม
dot
dot
Line:@audiocity
ไมโครโฟน Microphone ไมค์สาย
bulletSHURE
bulletLewitt
bulletTOA
bulletAKG
bulletBOSCH
bulletRODE
bulletBeyerdynamic
bulletAudio-Technica
Wireless Microphone ไมโครโฟนไร้สาย
bulletSHURE
bulletTOA
bulletAKG
bulletJTS
bulletMIPRO
bulletSennheiser
bulletSherman
bulletAudio-technica
MIXER (มิกเซอร์)
bulletYAMAHA
bulletSoundcraft
bulletMACKIE
bulletMIDAS
bulletBehringer
bulletAllen&Heath
bulletAudio Interface
เพาเวอร์แอมป์ Power Amplifier เครื่องขยายเสียง
bulletYAMAHA
bulletTOA
bulletQSC
bulletBOSCH
bulletCROWN
bulletNPE
bulletEV, Electro-Voice
bulletITC Audio
POWER MIXER เพาเวอร์มิกเซอร์
bulletYAMAHA
bulletMACKIE
bulletBehringer
Speaker ตู้ลำโพง ตู้ลำโพงกลางแจ้ง ราคาลำโพง PA
bulletJBL
bulletQSC
bulletTOA
bulletBOSE
bulletYAMAHA
bulletTurbosound
bulletTANNOY
bulletBOSCH
bulletNPE
bulletNEXO
bulletQUEST
bulletRenkus-Heinz
bulletSHERMAN
bulletEV, Electro-Voice
Portable PA ราคาชุดเครื่องเสียง ลำโพงพกพา ชุดเครื่องเสียง เครื่องเสียงเคลื่อนที่
bulletYAMAHA
bulletBOSE
bulletLD Systems
bulletTurbosound
bulletPEAVEY
bulletDECCON
bulletOKAYO
bulletXXL Power, BIK
bulletJBL Bluetooth
bulletชุดเครื่องเสียง
Karaoke คาราโอเกะ
bulletMBOX
bulletYAMAHA
bulletJBL Karaoke
Ceiling Speaker ลำโพงติดเพดาน
bulletTOA
bulletITC
bulletJBL
bulletQSC
bulletBOSE
bulletBOSCH
bulletTANNOY
bulletTurbosound
Horn Speaker ลำโพงฮอร์น
bulletTOA
bulletBOSCH
bulletITC Audio
bulletInter-M
Megaphone โทรโข่ง
bulletTOA
bulletSHOW
Conference ไมค์ประชุม
bulletTOA
bulletDIS
bulletBOSCH
bulletYAMAHA
bulletJTS
bulletTELEVIC
bulletNPE-NTS
bulletVideo Conference
bulletBOSCH
bulletTOA
bullet Soundvision
ชุดทัวร์ไกด์ Tour Guide System
bulletOKAYO
bulletTOA
Signal Processor, เครืองมือช่วยปรับแต่งเสียง
bulletCrossover (ครอสโอเวอร์)
bulletEqualizer (อีควอไลเซอร์)
bulletDBX
bulletASHLY
bulletYAMAHA
Projector โปรเจคเตอร์ เครื่องฉายภาพ
bulletSwitcher AV VGA HDMI
bulletProfessionnal Video
bulletSecurity Solutions
bulletระบบภาพและอคูสติกดีไซน์
bulletเครื่องเสียงระบบประกาศไร้สาย-Voip
bulletCable Connector สายสัญญาณ
bulletPlayback (Tape, CD, Tuner)
bulletProfession DJ
bulletHeadphone (หูฟัง)
bulletDigital Network Link
bulletMusic instrument
dot
ชื่อผู้ใช้ :
รหัสผ่าน :
เข้าสู่ระบบอัตโนมัติ :
bullet ลืมรหัสผ่าน
bullet สมัครสมาชิก
dot
dot
dot
จำนวน : 0 ชิ้น
ราคา : 0.00บาท
bullet ดูสินค้า
bullet ชำระเงิน
bulletระบบเสียงห้องประชุม ขนาดเล็ก
bulletTerminal รับโล่ DBD Verified 2012


เพิ่มเพื่อน


TANNOY CMS 803DC BM  
รหัส : CMS 803DC BM
ยี่ห้อ : TANNOY
รุ่น : CMS 803DC BM
Color/ สีของสินค้า :

รายละเอียดย่อ :
ลำโพงติดเพดาน 8" Ceiling Speaker with 70/100V Transformer and Low Impedance Operation, Blind Mount Version
รายละเอียดทั้งหมด :

 

TANNOY CMS 803DC BM ลำโพงติดเพดาน 8" Ceiling Speaker with 70/100V Transformer and Low Impedance Operation, Blind Mount Version

The Tannoy CMS 803DC is a full bandwidth, high power-handling and high sensitivity loudspeaker built around CMS 3.0 – the third generation of Tannoy’s revolutionary Ceiling Monitor System technology. Based on an all-new evolution of Tannoy’s proprietary Dual Concentric point-source driver, the CMS 803DC has been fundamentally re-engineered to deliver wider and more consistent broadband directivity, even greater intelligibility, and a more accurate and linear response. 

The new Dual Concentric driver design featuresrevolutionary Omnimagnet™ technology and unique patent-pending Torus Ogive Waveguide™ device, together providing more consistent and controlled directivity along with improved high frequency response. Improved time-alignment and greater coherence between LF and HF results in a wider sweet spot for enhanced performance both onand off-axis. The re-designed baffle provides a subtle extension to the waveguide effect for additional sonic benefits. 

The CMS 803DC also features extra clamp extension to accommodate thicker ceiling panels, and a locking design that prevents inadvertent over-screwing. Magnetic grille attachment enables easy removal and fitting for custom painting and tapping changes with grilles now available as either traditional style (inset in bezel) or new Arco™ style which conceals the entire unit for more architectfriendly aesthetic appeal. 

The CMS 803DC utilizes a 16 ohm driver, making it ideal for use in high performance low-impedance systems (with optimized performance when used in conjunction with Lab.gruppen LUCIA amplifiers). A low-insertion loss 60 W transformer is included, with convenient front bezel switching for taps at 60 W, 30 W and 15 W, with an additional 70.7 W tap for traditional constant voltage systems. 

The CMS 803DC is available in two variants. The BM (Blind Mount) version is supplied with an integral back-can, ready to install as a single unit, while the CMS 803DC PI (Pre-Install) is supplied without a back-can (separate back-can available). The zinc plated steel back-cans have an integrated, recessed termination box. The removable locking connector has screw terminals for secure wire termination and loop-thru facility. Strain relief is provided by a clamping mechanism for use with plenum-rated cable or conduit, while the new design’s spring-loaded and self-aligning clamps make for even quicker and easier installation. All models are supplied with classic grille, two tile support rails and one C-ring; Arco grille and plaster (mud) ring are available as optional accessories.

Features

 

  • Advanced new Dual Concentric driver design utilizing Omnimagnet technology
  • Torus Ogive Waveguide device for improved broadband directivity
  • Improved time alignment and phase coherence, delivering even better sonic performance
  • High power and high sensitivity with extended frequency response and very low distortion
  • Improved LF performance for applications where genuine bottom-end is a must
  • Low insertion-loss, 60 watt line transformer for a more powerful and dynamic performance
  • Convenient front-tapping switch for settings
  • Magnetically-adhering grille system for easy custom painting and optional Arco designer grilles for minimal architectural impact
  • Three-clamp, self-aligning mounting system
  • UV/weather resistant UL94V-0 ABS construction for structural integrity
  • Packaged with classic grille, tile rails and C-ring for quick and easy installation and simple stocking logistics
  • Five year warranty
SYSTEM
Frequency Response (-3dB) (1) 47 Hz - 30 kHz
Frequency Range (-10dB) (1)
BM back can model
40Hz - 35kHz
Frequency Range (-10dB) (1)
PI fitted with back can
41Hz - 35kHz
System Sensitivity (1W @1m) (2) 92 dB (1 W = 4 V for 16 Ohms)
Nominal Coverage Angle 90 degrees conical
Power Handling (3) Average: 90W 
Programme: 180W 
Peak: 360W
Recommended Amplifier Power 180W @ 16 Ohms
Nominal Impedance (Lo,Z) 16 Ohms
Rated Maximum SPL Average: 112dB
Peak: 118dB
With THP60 - Average: 110dB
Transformer Taps (via front rotary switch) 70V: 60 W (83 O) / 30 W (165 O) / 15 W (330 O) / 7.5 W (660 O) / OFF & low impedance operation
100V:60 W (165 O) / 30 W (330 O) / 15 W (660 O) / OFF & low impedance operation
TRANSDUCERS
Dual Concentric point source driver 1 x 200 mm (8.0”) Dual Concentric driver, using Omnimagnet technology
Low Frequency 44 mm (1.75”) voice coil, treated multi fiber paper pulp cone
High Frequency 25 mm (1.00”) PEI dome
PHYSICAL
Enclosure Backcan: Zinc plated steel
Baffle: Reflex loaded UL 94V-0 rated ABS
Grille: Steel, with weather resistant coating
Safety Features Safety ring located at rear of enclosure for load bearing safety bond
Clamping Design Security toggle clamp
Blind Mount (BM) Complete with fixed backcan
Pre Install (PI) Separate backcan for pre-installation
Cable Entry Options Cable clamp & squeeze connector for conduit up to 22 mm
Conduit Knockouts on PI Backcan 3 Sets of horizontal positions 19 / 22 / 28 mm (0.75” / 0.87” / 1.10”)
Connectors Removable locking connector with screw terminals with “loop through” facility
Dimensions
Bezel diameter 319.0 mm (12.56”)
BM Model: Front of ceiling to rear of backcan 310.5 mm (12.22”)
BM Model: Front of ceiling to top of safety loop 327.7 mm (12.90”)
PI Model: Front of ceiling surface to rear of speaker unit 125.6 mm (4.94”)
PI Model: Front of accessory backcan bezel to top of safety loop 168.5 mm (6.63”)
Hole cutout diameter (all models) 295 mm (11.61”)
Net Weight (ea) CMS 803DC BM: 8.50 kg (18.74 lbs) approx
CMS 803DC PI: 4.90 kg (10.80 lbs) approx CMS 803 PI Backcan: 6 kg (13.23 lbs) approx
Included Accessories C Ring
Tile bridge
Paint mask
Cutout template
Grille
Optional Accessories Plaster (Mud) ring
Packed Quantity 2

จำนวน      Unit


Copyright © 2010 All Rights Reserved. Terminal Solution