CMS401e |
SYSTEM |
Frequency Response (-3dB) (1) |
110Hz - 22kHz |
Frequency Range (-10dB) (1) |
80Hz - 24kHz |
System Sensitivity (1W @1m) (2) |
88dB (1W = 2.45V for 6 Ohms) |
Nominal Coverage Angle |
90 degrees conical |
Coverage Angle (1kHz to 6kHz) |
120 degrees |
Directivity Factor (Q) |
5.26 averaged 1kHz to 6kHz |
Directivity Index (DI) |
6.3 averaged 1kHz to 6kHz |
Rated Maximum SPL |
Average: 105dB
Peak: 111dB |
Power Handling (3) |
Average: 50W
Programme: 100W
Peak: 200W |
Recommended Amplifier Power |
100W @ 6 Ohms |
Nominal Impedance |
6 Ohms |
Transformer Taps (via front rotary switch) |
70V: 30W / 15W / 7.5W / 3.75W / OFF
& Low Impedance operation
100V: 30W / 15W / 7.5W / OFF
& Low Impedance operation |
Crossover |
7kHz inductively coupled |
TRANSDUCERS |
Low Frequency |
100mm (4.00") mineral loaded polypropylene |
High Frequency |
19mm (0.75”) ICT™ aluminium dome. |
PHYSICAL |
Enclosure |
Back Can: Reflex loaded UL 94V-0 rated ABS
Baffle: Reflex loaded UL 94V-0 rated ABS Grille: Steel, with weather resistant coating |
Safety Features |
Safety ring located at rear of enclosure
for load bearing safety bond |
Back Can |
Complete with fixed backcan |
Connectors |
Removable locking connector with screw
terminals with "loop through" facility |
Hole Cutout Diameter |
187mm (7.36") |
Dimensions |
Bezel diameter: 205mm (8.07")
Front of ceiling to rear of pod: 147.6mm (5.81") |
Net Weight (ea) |
3.05kg (6.72lb) |
Included Accessories |
C Ring, tile bridge, paint mask,
cutout template, grille |
Optional Accessories |
Plaster (Mud) Ring |
Clamping Design |
Min / Max clamping range: 0.0mm (0.0") / 20.0mm (0.79")
Recommended clamp torque: 1.5Nm
|
Notes: (1) Average over stated Bandwidth. Measured in an IEC baffle in an Anechoic Chamber (2) Unweighted Pink noise input, measured at 1m on axis (3) Long term power handling capacity as defined in EIA - 426B test |