| Model |
CMS 601DC PI |
| Part Number |
8001 4540 |
| Product Type |
Ceiling Monitor System |
| System |
Specifications |
| Frequency Range (-10dB) (1) |
46Hz - 30kHz Back can |
| System Sensitivity (1W @1m) (2) |
91dB (1W = 2.45V for 6W) |
| Nominal Coverage Angle |
90 degrees conical |
| Coverage Angle (1kHz to 6kHz) |
111 degrees |
| Directivity Factor (Q) |
4.7 averaged 1kHz to 6kHz |
| Directivity Index (DI) |
6.5 averaged 1kHz to 6kHz |
| Rated Maximum SPL |
110dB (average), 116dB (peak) |
| Power Handling (3) |
Average: 80W, Programme: 160W, Peak: 320W |
| Recommended Amplifier Power |
160W @ 8W |
| Nominal Impedance |
8 ohms |
| Transformer Taps |
70V:60W / 30W /15W /7.5W / OFF & low impedance operation, 100V:60W / 30W / 15W / OFF & low impedance |
| Crossover |
2kHz - 2nd order LF, 3rd Order HF (with dynamic HF protection) |
| Transducers |
Specifications |
| Low Frequency |
165mm (6.00") Dual Concentric™ constant directivity driver with multi fibre paper pulp cone |
| High Frequency |
25mm (1.00") titanium dome with neodymium magnet system |
| Physical |
Specifications |
| Enclosure |
Back can: Zinc plated steel, Baffle: Reflex loaded UL 94V-0 rated ABS, Grille: Steel |
| Safety Features |
Safety ring located at rear of enclosure for load bearing safety bond |
| Clamping Design |
Security toggle clamp |
| Back Can Options |
Separate back can for Pre Installation |
| Cable Entry Options |
Cable clamp & squeeze connector for conduit up to 22mm |
| Conduit Knockouts |
3 Sets of horizontal positions 19 / 22 / 28mm (0.75” / 0.87” / 1.10”) |
| Connectors |
Removable locking connector with screw terminals with "loop through" facility |
| Safety Agency Ratings (pending) |
UL-1480, UL-2043, CE |
| Included Accessories |
C Ring, tile bridge, paint mask, cutout template, grille |
| Optional Accessories |
Plaster (mud) ring |
| Hole Cutout Diameter |
253mm (10.00") |
| Dimensions (Bezel Diameter) |
280mm (11.30") |
| Dimensions (Back of Ceiling Surface to Rear of Back Can) |
151mm (5.90") |
| Dimensions (Back of Ceiling Surface to Top of Safety Loop) |
168.5mm (6.60") |
| Weight (ea.) |
9.02lbs, (4.09kg) |