Klark Teknik DN200 V2 ไดเร็คบ๊อก 2 Channel Active DI Box
Features
- 2-Channel Active DI box with high-headroom design and +48 V phantom power for extended dynamic range
- Sum and split options for flexible signal routing
- Fully transformer-isolated design ensures electrical separation between PA and stage equipment
- Balanced line inputs on Neutrik Combo* XLR and high impedance 1/4" TRS connectors
- Stereo input on 1/8" TRS for connection of consumer audio equipment
- Independent phantom powering for each channel for maximum reliability
- Global 20 dB input pad and earth lift switches
- Aluminium extrusion casing with protective rubber corners
- Compact and rugged design
Specification
Inputs
| Connectors |
2 x combo XLR, 2 x 1/4" TRS link jacks, 1/8" stereo TRS jack
|
| Impedance |
1 MΩ (combo & link jacks balanced), 20 kΩ (combo XLR only), 500 kΩ (1/8" stereo TRS jack unbalanced)
|
| Max input level |
28 dBu combo XLR and TRS link jacks (pad enabled),
21 dBu 1/8" TRS jack (pad enabled)
|
| Attenuator |
20 dB pad
|
Outputs
| Connectors |
2 x 3-pin XLR
|
| Impedance |
50 Ω
|
| Max output level |
13 dBu with 10 kΩ load, 10 dBu with 600 Ω load
|
| Min load |
600 Ω
|
System
| Noise |
103 dBu, 22 Hz to 22 kHz unweighted, with input terminated by 10 kΩ resistor
|
| Frequency response |
20 Hz to 20 kHz, ±1 dB, 10 kΩ load
|
| Distortion (THD + N) |
Typically <0.005% @ 1 kHz, +10 dBu
|
| Crosstalk |
<100 dB @ 1 kHz, inputs terminated
|
Power Requirement
| Voltage |
+48 V phantom
|
| Current consumption |
<10 mA per channel
|
Physical
| Dimensions |
118 x 63 x 142 mm (4.7 x 2.5 x 5.6")
|
| Weight |
0.65 kg (1.43 lbs)
|
|
