AKG PAE5 M Phantompower adapter - 5pinXLR
EXECUTIVE MODULARITY
for use in theatres, houses of worship and conference rooms
The PAE5 M reference phantom power module for fixed and mobile installation provides a five-pin XLR connector that allows the audio signal and the control voltage for a LED ring to be fed separately. Thus, the LED ring can be activated remotely by a 9-52V logic output from any automatic mixer to show the “mic on” status. With its wide voltage range the module will fit most available microphone mixers.
The PAE5 M features a bass roll off for reduction of structure-borne noise. Its integrated system connector with gold-plated contacts securely fits all available gooseneck modules of the DAM+ Series as well as the HM1000 M hanging module.
Extra feeding of LED ring to show mic status
for use with automixers including logic outputs
Highly reliable contacts to mounting modules
prevent contact problems and ensure extra-long life
RFi Shield technology
provides high immunity to radio-frequency interference
Feeds all DAM+ Series capsules
for highest flexibility
Switchable bass roll off
for reduction of body noise and proximity effect
TECHNICAL SPECIFICATION
General |
Audio Frequency bandwidth |
20 to 20000 Hz |
Bass Cut Filter |
150 Hz |
Recommended Load Impedance |
2000 Ohms |
|
Powering Interface |
Voltage |
9 to 52 V |
Current |
3.5 mA |
|
Audio Output |
Type |
Balanced XLR |
Gender |
Male |
Contacts |
5-pin |
|
Dimensions / Weight |
Height |
65.5 mm |
Diameter |
19.1 mm |
Net Weight |
43 g |
|