Countryman E2 Earset ไมโครโฟน ขนาดเล็ก-สั้น Unidirectional EarSet Microphone (Cocoa) Earset Pure Sound, Nearly Invisible
The Countryman E2 Unidirectional Earset Microphone is a miniature ear-set microphone for virtually invisible operation in stage performances, trade shows, houses-of-worship, auctions, lectures and much more.
The E2 is designed with a small boom and ear-loop for low visibility. Its unidirectional polar pattern features a uniform frequency response and minimizes off axis noise and feedback. An equalizing circuit in the audio connector custom tunes the frequency response to deliver both rich highs, mid-range presence and full-bodied bass.
A wide variety of colors and connections are available for use with various wireless transmitters. This version is cocoa and the cable terminates to a 3-pin XLR connector for direct connection to microphone preamplifiers, mixers, etc.
Pure Sound, Nearly Invisible
The E2 Earset redefines pure sound in a virtually invisible package that is easier to use than even a lavalier or podium microphone. Like the classic E6 Earset, the E2 rests over the ear, but has a much shorter boom. Its uni-directional element provides nearly the isolation of an E6 Omni at the mouth, but with significantly less visibility. With an equalizing circuit built into the audio connector, the frequency response is tuned so you can experience full-bodied bass and precise highs that are indiscernible from an E6 Omni at the mouth. The element, boom, and new sub-miniature connector are all easily hidden on the user’s face; the position near the ear eliminates breath pops and makes fitting easy and quick. This results in the smallest and most discreet professional-quality microphone available.
Excellent Isolation
In all kinds of acoustic spaces, the E2 achieves surprisingly comparable isolation (gain-before-feedback) to an E6 Omni positioned at the user’s mouth. We tested the two mics against each other in several large and small venues and confirmed that in all cases the E2 gain-before-feedback was within 3 dB of the E6 at the mouth.
There are two aspects of the E2 design that allow this to be possible so far away from the mouth: strong off-axis rejection and precisely-tuned frequency response. The off-axis rejection, as shown in the datasheet, is strong for all frequencies in the audio band—not just 1kHz as with many competitive directional mics—so the feedback-rejection is equally effective in smaller or larger venues.
For on-axis interferences, the frequency response tuning in the connector of the E2 allows us to fully capitalize on the proximity boosting effect of the mic to achieve even stronger isolation in the voice band. We tuned the frequency response of the E2 to be as flat as possible in use by taking into account the frequency-shaping properties of the head, and the acoustics of the mic itself. This results in full sound, and high gain-before-feedback.
Transducer |
Condenser |
Polar Pattern |
Unidirectional |
Frequency Response |
20Hz to 20kHz |
Dynamic Range (Typical) |
Not Specified by Manufacturer |
Signal-to-Noise Ratio |
Equivalent Acoustic Noise: 39dBA SPL |
Maximum Input Sound Level |
140dB SPL |
Power Requirements |
+48V Phantom Power |
Output Impedance |
1.0mV / Pascal |
Output Connectors |
3-pin XLR Male |
Dimensions |
Not Specified by Manufacturer |
Weight |
0.07 oz (2g) |