RODE NT55 MATCHED PAIR ไมโครโฟน Acoustically Matched Pair of NT55 Microphones
ไมค์คอนเดนเซอร์ชนิด Small-diaphragm แบบแพ็คคู่ สามารถปรับ PAD ได้ 3 ระดับ (0, -10dB, -20dB) และปรับ High Pass Filter ได้ 3 ระดับ (Off, 75Hz, 150Hz) เหมาะสำหรับงานบันทึกเสียง acoustic instruments, drum overheads, cymbals และ live performances มาพร้อมกับหัวไมค์แคปซูล 2 แบบ Cardioid / Omni ตัวจับไมค์ และฟองน้ำครอบหัวไมค์
Like the NT5, the RØDE NT55 is a small-diaphragm, true-condenser cardioid microphone, sometimes referred to as a 'pencil mic'. The NT55 adds both a three position pad (0, -10dB, -20dB) and three stage high pass filter (Off, 75Hz, 150Hz), and includes the interchangeable NT45-O omnidirectional capsule.
Intended for recording acoustic instruments, drum overheads, cymbals and live performances, the compact externally polarized mic employs a 1/2" capsule, an active J-FET impedance converter with bipolar output buffer. Its tight cardioid pickup pattern also makes it ideal for use as an indoor dialogue microphone for filmmaking on a mic stand or boom.
Finished in durable satin nickel, the NT55 available as a single microphone or as an acoustically matched pair.
The NT55 is designed and made in Australia, and covered by RØDE's industry leading 10 year warranty.
Features
- Externally biased condenser
- Cardioid or Omni polar pattern using included interchangable capsules
- Gold sputtered 1/2” capsule
- Three position PAD - 0dB, -10dB and -20dB
- Three position High-Pass Filter - flat, 75Hz and 150Hz
- Surface mount circuitry
- Low noise
- Available as Certified Matched Pair
- 10 year extended warranty when you register online at www.rodemic.com/warranty
In the box
- 2 x NT55 - Multi-Pattern 1/2" Condenser Microphones
- 2 x NT45-O - Interchangeable Omnidirectional Capsule
- 2 x RM5 - Durable Microphone Clip
- 2 x WS5 - Pop Filter/Wind Shield
Specifications
Acoustic Principle |
Pressure Gradient |
Active Electronics |
JFET impedance converter with bipolar output buffer |
Capsule |
0.50" |
Polar Pattern |
Cardioid, Omni |
Address Type |
End |
Frequency Range |
20Hz - 20kHz |
Output Impedance |
100Ω |
Maximum SPL |
136dB SPL (@ 1kHz, 1% THD into 1KΩ load) |
Maximum Output Level |
8.0dBu (@ 1kHz, 1% THD into 1KΩ load |
Sensitivity |
-38.0dB re 1 Volt/Pascal (12.60mV @ 94 dB SPL) +/- 2 dB @ 1kHz |
Equivalent Noise Level (A-weighted) |
15dB-A |
Power Options |
+48V phantom power |
Weight |
110.00gm |
Dimensions |
145.00mmH x 20.00mmW x 20.00mmD |
Output |
XLR Output |
Warranty |
1 year with free extension to 10 years following registration here |