SHURE VP88 Stereo Condenser Microphone

The Shure Model VP88 is a single-point, stereo condenser microphone for use in professional studio recording, field production, electronic news gathering (ENG), and studio broadcasting applications. It combines two condenser cartridges in a single housing to create a stereo audio image of the sound source. It is unique in its ability to capture the realism of a live event and yet withstand rigorous field production environments.

One cartridge (Mid) faces forward to capture on-axis sound using a cardioid pickup pattern. The other cartridge (Side) is bi-directional, capturing sound from either side. The VP88 contains an internal M-S matrix with three settings for different degrees of stereo image separation. The internal matrix can be bypassed if an external matrix is used or if stereo imaging is done in post-production. 

Feature.

Time-coherent, Mid-Side (M-S) design for optimal stereo imaging

Built-in stereo matrix for direct control of the stereo spread; direct M-S outputs available

Mono compatibility ideal for broadcast applications

Switch-selectable, low-frequency rolloff (12 dB/octave below 80 Hz) for reduced pickup of ambient noise and stand vibration

Operates on phantom power or a 6V camera battery

LED power indicator Internal shock mount for reduced stand vibration and handling noise

Built-in "pop" screen

Specs.

Transducer	Electret Bias Condenser
Polar Pattern	Cardioid
Frequency Response	40Hz-20kHz
Dynamic Range (Typical)	105dB
Signal-to-Noise Ratio	70dB
Maximum Input Sound Level	800 Ohm Load: 129dB 150 Ohm Load: 119dB
Power Requirements	Phantom Power, (9-52v DC)
Output Impedance	150 Ohms (100 Ohms Actual)
Output Connectors	XLR-5M Included 'Y' Cable then Terminates to Two XLR-3M Connectors
Pad	None
Low Frequency Roll-Off	Yes, (12dB/Octave Below 80Hz)
Applications	Field Recording, ENG, Stereo Studio Miking, Broadcast
Dimensions	11.44 x 1.56" (290 x 39.7mm) LxDiameter
Weight	14.7 oz. (417 g)