TASCAM TM-DRUMS ชุดไมค์กลอง MICROPHONE SET
Features
- TM-50DB Dynamic Cardioid Kick-Drum Mic
- TM-50DS Dynamic Cardioid Snare Mic
- 2x TM-50C Condenser Overhead Mics
- Includes Mic Clips and Stand Mounts
- 2x Windscreens
- Hard Carrying Case
As the driving force behind modern music, drums and percussion have developed as powerful, complex instruments. And harnessing this power requires a very specific toolset. The TM-DRUMS microphone kit from TASCAM has been created to provide the recording or live sound engineer with everything required to capture a truly inspiring soundscape.
Included the TM-DRUMS kit are: one (1) TM-50DB Dynamic Kick Drum mic with integrated stand mount, one (1) TM-50DS Dynamic Snare mic with integrated stand mount and two (2) TM-50C Overhead Condenser mics with included mic clips and windscreens. A hard Carry Case is also included.
TM-50DB
Model:
Dynamic
Directivity:
Cardioid (unidirectional）
Frequency response:
50Hz -15,000Hz
Output impedance:
400Ω +/-30% (at 1 kHz)
Load impedance:
<1kΩ
Sensitivity:
-55dB +/-3dB (0dB=1V/Pa at 1kHz)
Connector:
3 pin XLR, Male
External dimensions:
59(W) . 118 (H) . 115 (D) mm/ 2.32 x 4.65 x 4.53 inch
Weight:
460g (Microphone body only)
Included Accessories:
5/8 inch -3/8 inch conversion adapter
TM-50DS
Model:
Dynamic
Directivity:
Cardioid (unidirectional）
Frequency response:
50Hz -14,000Hz
Output impedance:
350Ω +/-30% (at 1kHz)
Load impedance:
<1kΩ
Sensitivity:
-56dB +/-3dB (0dB=1V/Pa at 1kHz)
Connector:
3 pin XLR, Male
External dimensions:
42.5(W) . 105 (H) . 98 (D) mm/ 1.67 x 4.13 x 3.86 inch
Weight:
330g (Microphone body only)
Accessories:
5/8 inch -3/8 inch conversion adapter
TM-50C
Model:
Condenser (16mm diaphragm)
Directivity:
Cardioid (unidirectional)
Frequency characteristics:
30Hz -18,000Hz
Output impedance:
100Ω +/-30% (at 1kHz)
Load impedance:
<1kΩ
Sensitivity:
-38dB +/-3dB (0dB=1V/Pa at 1kHz)
Maximum SPL:
130dB
Signal-noise ratio:
74dB
Connector:
3 pin XLR, Male
External dimensions:
21(W) . 117 (H) . 21 (D) mm/ 0.83 x 4.61 x 0.83 inch
Weight:
85g (Microphone body only)
Included Accessories:
Microphone holder, 5/8 inch -3/8 inch conversion adapter
