ASHLY MX-508 มิกเซอร์ Stereo Mixer 8-Channel Mic/Line 3RU, 5 Year Warranty

Features:

• High-gain microphone preamps with very low noise and distortion
• Three-band input equalizers with tunable mid-range
• 48 Volt phantom power for use with any condenser microphones
• 5 Year Warranty

 General Specifications
 

• THD at +4 dBu, 20Hz-20KHz <0.05%
• THD at +20dBu, 30Hz-10KHz <0.05%
• IMD (SMPTE) at +20dBu <0.05%
• HUM & NOISE (20Hz-20KHz at max preamp gain)
• Equivalent input hum and noise <-127dBu
• Residual output noise, all levels at minimum <-100dBu
• Master Level and one Ch. Level at nom <-80dBu
• Aux 1 or 2 Out, Aux Master and one Ch. Aux at nom . <-80dBu

• MAXIMUM VOLTAGE GAIN (±2dB)
• Mic Input to Master Output, 600 ohm load 84dB
• Line Input to Master Output, 600 ohm load 42dB

• AUX SENDS
• Mic Input to Aux Master Output, pre ch. level 76dB
• Mic Input to Aux Master 2 Output, post ch. level 92dB
• SUB Input to Master Output 12dB

• AUX RETURNS 1 or 2 to Master Output 30dB
• TAPE/CD In to Master Output 34dB

• FREQUENCY RESPONSE
• 20Hz-20KHz +0.5/-1.0dB
• 50Hz-10KHz +0/-0.5dB

• EQUALIZATION
• Low ±12dB at 70Hz, shelving
• Mid ±12dB peaking, 140Hz-8KHz
• High . ±12dB at 15KHz, shelving

• CROSSTALK
• Adjacent inputs, 20Hz-20KHz <-65dB
• Mic Input to Master Output, 1KHz <-65dB
• Mic Input to Master Output, 20KHz <-55dB

• INDICATORS
• VU METERS (Selectable to Main or Aux Outputs) 0VU = +4dBu
• PEAK INDICATORS Indicator on Inputs, L & R outputs, lights 3dB below clipping

• PHANTOM POWER
• (+48 VDC applied to all Mic Inputs, switchable on front panel)
• Maximum total current draw = 80mA.
• Maximum single channel current draw = 14mA.
• Gradual power-up and down to eliminate "pops".

• SHIPPING WEIGHT 20 lbs. maximum with 8 input transformer options installed
• POWER REQUIREMENTS 100-240 VAC, 50-60 Hz, 35 watts
• DIMENSIONS:
• 19" wide x 5.25" high x 8.0" deep.