ALLEN&HEATH GL3800-824B 4 Stereo Ch To Right Of Master

FEATURE

• 24, 32, 40, and 48 channel frames
• A,B,C,D mono/stereo channel options
• LR and M main mixes
• 8 Audio groups with pan and routing to LR and M
• 10 Auxes including a dedicated stereo send with level and pan controls
• 2 multi-function stereo channels each with mic and stereo line inputs
• 2 extra dual stereos provide 4 summed or independent stereo returns
• Fully featured 12x4 Matrix
• Proper dual functionality for FoH, monitor mixing, or both
• Recording capable with channel direct outputs
• M can be used for centre/sub mix, LR mono sum, or engineers wedge
• Matrix external inputs with level trims and common input capability
• Stereo channel mic inputs can cross patch into matrix for ambience feed
• Responsive 4 band, 2 sweep EQ
• 100Hz channel high pass filters
• Individual phantom power and polarity switching
• Integral meterpod with 11 LED-illuminated, moving coil VU meters
• Wide angle LED channel and master meters
• Dedicated stereo monitor meters
• Per channel pre/post fader aux switching for full flexibility
• Front panel pre/post-EQ switches for user preference
• Mutes on all fader masters
• 100mm premium grade dual rail faders
• Assignable talkback to all outputs, includes a talk switch latch mode
• 1kHz oscillator / pink noise generator with external output
• 2-track monitoring and replay to LR
• 3 headphones/earpiece sockets and local monitor outputs
• Electronically balanced XLR outputs with +26dBu drive capability
• Preamp 74dB range with +34dBu input capability for mic or line
• Ultra low noise mix head amp design
• Uses RPS11 high performance, external linear power supply
• Built-in combiner for redundant backup supply
• Individual circuit card assembly with nutted pots
• Sys-Link V2 console input/output linking option
• 4-pin XLR lamp sockets – Allen & Heath LEDlamp available

Mono / Stereo Channel Options :
A = all mono channels
B = 4 stereos to right of masters
C = 4 stereos on far right side
D = 8 stereos on far right side

Specifications:

Allen & Heath GL3800-824 Specifications :

Total # Of Inputs
    24 

Mic/Line Inputs
    24 - 1/4" TRS Phone
    24 - Balanced 3-pin XLR 

Stereo Line Inputs
    4 Stereo - L/R 1/4" TRS Phone 

In-Line Inputs/Returns
    4 Stereo Inputs - ST1 through ST4 

AUX Sends
    10 Aux Sends - 1/4" TRS Phone 

AUX Returns
    refer to ST1 - ST4 stereo inputs 

Inserts
    All mono channels, aux sends, main outputs and group outputs 

BUS (Group) Outputs
    8 - 1/4" TRS Phone shared with AUX sends 

2 Trk Master I/O
    Monitor Out: L/R 1/4" TRS Phone
    Main Out: Left / Center / Right Output 3-pin Balanced XLR 

ALT I/O
    Matrix In: 1/4" Phone x4
    Matrix Out: 1/4" Phone x4 

Monitor Outputs
    Monitor Out: L/R 1/4" Phone 

EQ Section
    Mono EQ:
    HF Shelving +/-15dB, 12kHz HM Peaking/dip +/-15dB, 500Hz to 15kHz, Q=1.8
    LM Peaking/dip +/-15dB, 35Hz to 15kHz, Q=1.8 LF Shelving +/- 15dB, 80Hz
    Stereo EQ: HF Shelving +/-15dB, 12kHz
    HM Peaking/dip +/-15dB, 2.5kHz, Q=1.8 LM Peaking/dip +/-15dB, 250Hz, Q=1.8
    LF Shelving +/- 15dB, 80Hz 

Solo/Mute
    Mute / PFL on all channels 

Channel Level Control
    100mm faders 

Trim/Gain Control
    Sealed Rotary Potentiometers 

Phantom Power
    +48 Volt Phantom Power (all mono channels) 

Metering
    Integral meterpod with 11 LED-illuminated, moving coil VU meters
    Wide angle LED channel and master meters Dedicated stereo monitor meters 

Frequency Response
    20Hz to 50kHz +/-0.5dB 

Dynamic Range
    not specified by manufacturer 

Signal-to-Noise Ratio
    Mic EIN -128dB
    Residual output noise < -96dBu (-100dB S/N) 

Total Harmonic Distortion (THD)
    Mic to mix out < 0.003% 

Power Supply
    External RPS11 IEC Input
    External Input for optional RPS11 backup supply 

Dimensions
    10.8 x 40.4 x 27.2" (275 x 1026 x 691mm) (HxWxD) 

Weight
    72.61 lbs (33kg)