ติดต่อขอราคาสินค้า ใบเสนอราคางานระบบเสียง
สอบถามข้อมูล
YAMAHA QL1 ดิจิตอลมิกเซอร์ Digital Mixing Console 16 Analog input, 8 output, 8 Matrix. ( Max 32 input via optional i/o ), Superior Dante Networking Built In.Fader configuration: 16 + 2 (Master), Rack mountable with optional RK1 Rack Mount Kit.
Crosstalk@1kHz : A 22kHz, 30dB/Oct filter is used to measure crosstalk. Total Harmonic Distortion : An 80kHz, 18dB/Oct filter is used to measure total harmonic distortion. Hum & Noise : An A-Weight filter is used to measure hum &noise.
*1. The sensitivity is the input level required for output at +4dBu (1.23V) or at the defined level when all the faders and level controllers are set to the maximum value. *2. XLR-3-31 connectors are balanced jacks (1=GND, 2=HOT, 3=COLD). *3. 0dBu=0.775 Vms for all specifications. *4. All the AD converters use 24-bit linear/128-times oversampling. *5. The INPUT connectors have +48V DC (phantom power) jacks, each of which can be turned on/off individually from the console software. *6. QL1: INPUT1-16
*1. XLR-3-32 connectors are balanced jacks (1=GND, 2=HOT, 3=COLD). *2. The PHONES connectors for stereo headphones are balanced jacks (Tip=LEFT, Ring=RIGHT, Sleeve= GND). *3. 0 dBu=0.775 Vms for all specifications. *4. All the DA converters use 24-bit linear/128-times oversampling. *5. The console has an internal switch for toggling the maximum output level. *6. This is a value measured with the PHONES LEVEL knob set to 10 dB below the maximum position. *7. QL1: OMNI OUT 1-8
*1. QL1: 32ch Input/32ch Output@48kHz
*1. XLR-3-32 connectors are balanced jacks (1=GND, 2=HOT, 3=COLD).
Each I/O Slot accepts a Mini-YGDAI card. Only Slot 1 has a serial interfac
