| Rated power bridge mode 8 Ohms: |
2400Watts @ 1 kHz at <0.5% T.H.D. |
| Rated power (2 X4 Ohms): |
1200 Watts per channel @ 1 kHz at <0.5%
T.H.D. both channels driven |
| Rated power (2 X 8 Ohms): |
800 Watts per channel @ 1 kHz at <0.5%
T.H.D.both channels driven |
| Power bandwidth: |
20 Hz - 20kHz; +0, -0.5 dB at rated 200 Watts 8 Ohm power |
| T.H.D.(2 X 4 Ohms): |
<0.05%@600 Watts per channel from 20 HZ to 20 kHz |
| T.H.D.(2 X 8 Ohms): |
<0.05%@400Watts per channel from 20 HZ to 20 kHz |
| Minimum load impedance: |
2 Ohms |
| Maximum RMS voltage swing: |
93Volts |
| Frequency response: |
10 Hz - 50 kHz; +0, -3 dB at 1 Watt |
| Input CMRR: |
>-65 dB @ 1 kHz |
| Rated power (1 X 4 Ohms): |
1300 Watts @ 1 kHz at <0.5% T.H.D. |
| Rated power (1 X 8 Ohms): |
860 Watts @ 1 kHz at <0.5% T.H.D. |
| Phase response: |
+20 to -25 from 20 Hz to 20 kHz |
| Input impedance: |
20 k Ohms, balanced; 10k Ohms, unbalanced |
| Cooling: |
Tow temperature dependant variable speed 120mm high output DC fans |
| Controls: |
Two front panel attenuators, rear panel mode switch and gain s
elect switch |
| Voltage gain: |
0.775V, 32 dB or 26 dB |
| Crosstalk: |
>-60 dB @ 1 kHz at rated power @ 8 Ohms |
| Hum and noise: |
>-104 dB, "A" weighted referenced to rated power @ 8 Ohms |
| Slew rate: |
>25V/us |
| Damping factor (8 Ohms): |
>800:1 @ 20Hz - 1 kHz |
| Indicator LEDs: |
2 Clip,2 signal presence, 2 active status, 2Protection |
| Protection: |
Thermal, DC, turn-on bursts, incorrect loads |
| Connectors: |
XLR, Speakon and Binding Post speaker output,240/230 Volt 20 amp IEC mains |
| Construction: |
16 ga. Steel |
| Dimensions: |
132mm x 483 mm x 498 mm |
| Net weight: |
32kg |
| Gross weight: |
35kg |
