BIAMP MCA 8150 8-channel, 150W amp with bridging & remote control
MCA Series Multi-Channel Amplifiers provide eight channels of power amplification. Model MCA 8150 delivers 150 watts/channel into 4 ohms. Channels may be bridged in pairs for higher combined wattage. Connections are provided for remote control of channel levels & muting. MCA Series amplifiers are covered by a five-year warranty.
- 8 channels of 150W
- Channels may be bridged in pairs for combined power
- Terminals for remote control of channel levels/muting
- Balanced line-level inputs on plug-in barrier strips
- Rear panel level controls & high-pass filter switches
- Amplifier outputs on screw-terminal connectors
- Dual-color signal/peak indicators on front & rear panels
- Front panel indicators for amplifier temp/load faults
- Fan cooled with complete output/speaker protection
- Optional transformers for 25/70/100 Volt systems
- Incorporates AES recommended grounding practices
- CE marked & UL / C-UL listed
- Covered by Biamp Systems’ five-year warranty
Specification
- Maximum Power Output(individual channel into 4 ohm load) : 150 watts/channel (@ 2kHz)
- Maximum Power Output(individual channel into 4 ohm load) : 90 watts/channel (@ 2kHz)
- Maximum Power Output(bridged channels into 8 ohm load) : 300 Watt (@ 2kHz)
- Signal to Noise : > 85 dB (20Hz~20kHz @ rated power)
- THD + Noise : < 0.2 % (20Hz~20kHz @rated power)
- Intermodulation Distortion (SMPTE) : < 0.35 %
- Frequency Response : +0/-1dB (20Hz~20kHz)
- Input Impedance (Balanced) : 20k ohms
- Input Impedance (unbalanced) : 10k ohms
- Input Sensitivity : 0.775 Vrms (0dBu)
- Channel High-Pass Filters : 12dB/octave @ 120Hz
- Power Requirements : 115/230VAC 50/60Hz
- Power Consumption : 1800 Watt maximum
- Width : 19 in (483 mm)
- Height (3 rack spaces) : 5.25 in (133 mm)
- Depth : 15.50 in (394 mm)
- Maximum load protection : 35 lbs (15.9 kg)
