wer Output |
2 ohm Dual (Per Channel): 250W
4 ohm Dual (Per Channel): 600W
8 ohm Dual (Per Channel): 600W
16 ohm Dual (Per Channel): 300W
70V Dual (Per Channel): 600W
100V Dual (Per Channel): NR
4 ohm Bridge: 500W
8 ohm Bridge: 1200W
16 ohm Bridge: 1200W
140V Bridge: 1200W
200V Bridge: NR |
Damping Factor |
10 Hz - 100 Hz:>3000 |
Input Sensitivity |
Switchable:
1.4V(8/4 Ohms)
26 dB Gain:
2.46V(4 Ohm Load)
3.47V (8 Ohm Load)
1.4V(70V) |
Input Impedance |
10 kOhms balanced(nominal), 5 kOhms unbalanced(nominal) |
Gain |
50:1 (34 dB) |
Frequency Response |
20 Hz - 20 kHz +/-0.25 dB @ 1W |
Signal-to-Noise Ratio |
105 dB A-Weighted, below rated power(20 Hz - 20 kHz) |
Total Harmonic Distortion (THD) |
< 0.1%, at full rated power (20 Hz - 20 kHz) |
Input Connections |
2 x Balanced 3-Pin Terminal Block Connectors(one per channel) |
Output Connectors |
1 x 4-Pole Terminal Strip(Ch 1, Ch 2) |
Controls Front Panel |
1 x Power Switch |
Controls (Rear) |
1 x Reset Switch
1 x Rotary Channel Level Control(per channel)
1 x 2-Position Operation Mode Switch
1 x Highpass Filter Switch(per channel)
1 x "Y" Input Switch
1 x Interior 3-Position Input Sensitivity Switch(per channel) |
Indicators |
Front Panel:
1 x Yellow LED Bridge Mode Indicator
1 x Green LED Ready Indicator
3 x Green LED Signal Indicators(per channel)
1 x Red LED Clip Indicator(per channel)
1 x Red LED Thermal Indicator(per channel)
1 x Red LED Fault Indicator
1 x Yellow LED Data Indicator(per channel)
1 x Blue LED Power Indicator
Back Panel: No Indicators on Back Panel |
Cooling |
Continuously Variable Speed Fans
Ventilation Grille(Front),Cooling Vents(Back)
Front-to-Rear forced airflow |
Power Consumption |
24W (120 VAC Mains) |
Dimensions |
19 x 3.5 x 14.3" (483 x 89 x 362mm) |
Weight |
23.4 lb (10.6 kg) |
Specialties |
Variable Speed Fan Cooling
Thermal Level Control
JTS Limiting Circuitry |