CROWN CTS1200USP4CN 2-Channel High Power Amplifier with PIP2 support
Crown Audio's CTS1200USP4CN 2-Channel Pro Power Amplifier provide exceptional performance, flexibility and value for installed sound applications. Crown Audio's CTS1200USP4CN amplifier features independent selection of high and low impedance operation for a specific channel, plus power levels and features that were carefully chosen to match the requirements of fixed install design. Easy integration with HiQnet and CobraNet allows this amplifier to deliver a comprehensive lineup of monitoring and control features along with digital audio transport for an award-winning digital audio solution.
Channels |
2 |
Sensitivity |
1.4V |
Signal to Noise Ratio |
105dB (below rated power 20Hz to 20kHz, A-Weighted) |
Total Harmonic Distortion |
< 0.1% (full rated power,20Hz - 20kHz) |
Damping Factor |
<3000 (10 Hz to 100Hz) |
Frequency Response |
± 0.25dB (at 1W into 4/8 ohms) |
Crosstalk |
> 80dB |
Common Mode Rejection (20Hz to 1Khz) |
> 50dB |
Maximum Input Level |
+20dBu (before input compression) |
Load Impedance |
70V, 100V (2-16 Ohms) |
Voltage Gain |
35:1 (31dB) (at maximum level settings) (8/4 ohm operation) |
Power Draw at Idle |
24W |
Power Rating |
2-ohm dual (per ch.): 250W
4-ohm dual (per ch.): 600W
8-ohm dual (per ch.): 600W
16-ohm dual (per ch.): 300W
70V dual (per ch.): 600W
100V dual (per ch.): 600W
4-ohm bridge: 500W
8-ohm bridge: 1200W
16-ohm bridge: 1200W
100V bridge: 1200W
140V bridge: 1200W
200V bridge: 1200W |
Dimensions (W x H x D) |
19 x 3.5 x 14.25 in / 48.3 x 8.9 x 36.2 cm |
Weight |
22.8 lbs / 10.34 kg |