CROWN CTS2000BLU 2-Channel Power Amplifier 1000wpc 4/8-ohms 70v
Crown’s CTs Series amplifiers provide exceptional performance, flexibility and value for installed sound applications. CTs Series amplifiers feature independent selection of high and low impedance operation for a specific channel, plus power levels and features that were carefully chosen to match the requirements of fixed install design. Easy integration with HiQnet™ and CobraNet™ allows CTs amplifiers to deliver a comprehensive lineup of monitoring and control features along with digital audio transport for an award-winning digital audio solution.
The BSS & Crown® PIP-BLU is a PIPTM (Programmable Input Processor) input module for CTs 2 Channel Amplifiers (CTs 600,1200, 2000, 3000). It connects the amplifier to a 100 Mb Ethernet network allowing it to be remotely controlled and monitored using HiQnetTM London Architect as well as providing digital audio transport via BLU link.
The PIP-BLU offers 2 channels of audio via the Soundweb London digital audio bus informally known as BLU Link. This high bandwidth digital audio bus provides easy connectivity with fault tolerance. BLU link features a low latency, fault tolerant digital audio bus of 256 channels which uses standard Category 5e cabling giving a distance of 100m between compatible devices. The BSS Audio MC-1 fiber optic media converter can be used to increase the distance between devices to over 10km (6.2 miles) using single mode fiber.
The PIP-BLU allows for both BLU link and analog input and output. This allows for analog audio to be used as a backup as well as being distributed to additional amplifiers. The ability to listen to the output via BLU link also allows for confidence monitoring.
The audio path in the PIP-BLU is designed to match the standard Smart-AmpTM feature set available in the PIP-Lite module and MacroTech I Series amplifiers. These features include input compressors, multimode output limiters, error reporting and load monitoring. These features are designed to allow for protection of your speakers while the processing is done upstream.
The PIP-BLU is a HiQnet component. This means it connects to a HiQnet system via 100 Mb Ethernet. With HiQnet, a control system of any size can be interconnected using standard 100 Mb Ethernet components (Switches, Network Interface Card, and cables). The control portion of the PIP-BLU can also be connected to a CobraNetTM network to allow for easy network creation.
- High power density. All two channel models and four channel model in a 2RU chassis, eight channel model in a 3RU chassis
- Crown Switching Power Supply for lighter weight
- Selectable "Constant-Voltage" or low-impedance (4/8 ohm) operation per channel on 2-channel models, and per channel-pair on 4-and 8-channel models
- 100V direct outputs on CTs 2000, CTs 3000, CTs 4200, and CTs 8200
- Legendary Crown class-I (BCA) and AB+B output topologies offer the best in amplifier reliability
- 4- and 8-channel models offer perfect independent power solutions for multi-zoned systems· "FIT" (Fault Isolation Topology) circuitry on 4- and 8-channel models isolates fault conditions without affecting neighboring channels
- Comprehensive array of indicators provide accurate diagnostics
- Two-channel models are fully PIP2-compatible. Multi-channel models accept MC accessory modules.
- Digital Audio Transport via BLU link
- Programmable Input Processor with HiQnet Control
- Remote control and monitoring of CTs 2 channel amplifiers
- 2 analog line level inputs and outputs for 2 x 2 BLU link I/O expansion
- Five Year, No-Fault, Fully Transferable Warranty completely protects your investment and guarantees its specifications
- Implements SmartAmpTM features
- • Input compressors
- • Multimode output limiters
- • Error reporting
- • Real time load monitoring
| 2-ohm Dual (perch.): |
1000W |
| 4-ohm Dual (perch.): |
1000W |
| 8-ohm Dual (perch.): |
1000W |
| 16-ohm Dual (perch.): |
625W |
| 70VDual (perch.): |
1000W |
| 100VDual (perch.): |
1000W |
| 4-ohm Bridge: |
2000W |
| 8-ohm Bridge: |
2000W |
| 16-ohm Bridge: |
2000W |
| 100V Bridge: |
2000W |
| 140V Bridge: |
2000W |
| 200V Bridge: |
2000W |
General Performance Specifications
| Total Harmonic Distortion (THD) at full rated power, from 20 Hz to 20 kHz: |
< 0.35% |
| Intermodulation Distortion (IMD) 60 Hz and 7 kHz at 4:1, from -40 dB to full rated power: |
< 0.35% |
| Load Impedance: |
2-16Ohms, 70V,100V* |
| Stereo: |
2-16Ohms, 70V, |
| Bridge Mono: |
100V*
4-16 Ohms, 140V, 200V*
4-16 Ohms, 140V, 200V* |
| Voltage Gain(at maximum level setting): |
63.9:1 (36 dB) |
| 8/4 Ohm Operation: |
20:1 (26 dB) |
| 26 dB: |
50:1 (34 dB) |
| 70V Operation: |
50:1 (34 dB) |
| Input Sensitivity: |
1.4V |
| 2/4/8 ohms: |
1.4V |
| 70V: |
n/a |
| 100V: |
4 ohm: 1.74V |
| 26 dB: |
8 ohm: 2.46V |
| Power Draw at Idle (120 VAC mains): |
35W (Standby Mode) |
| Net Weight: |
27.0 lb (12.2 kg) |
| Shipping Weight: |
32.0 lb (14.5 kg) |
PIP-BLU
| Network: |
RJ-45 connector forming an IEEE 802.3 Ethernet NIC connection. |
| Balanced Audio Inputs and Outputs: |
3-pin, 5mm removable barrier blocks |
| DATA indicator: |
Flashes when the PIP-BLU receives a valid command that is addressed to the PIP-BLU. |
| PRESET indicator: |
Flashes to indicate the selected and active user preset. |
| Memory Backup: |
4 Megabit nonvolatile FLASH memory for backup of run-time settings, presets, and program storage. Capable of 10,000 write cycles. |
| Power Requirements: |
No external power is required. |
| Analog Input Impedance: |
20 kilohms balanced
and 10 kilohms unbalanced |
| Maximum Input Level: |
+20 dBu |
| Analog Output Impedance: |
30 Ohms |
| Maximum Output Level: |
20 Hz - 20 kHz, +/- 0.25 dB, < 10 Hz - 50 kHz +0/-3 dB @ 96 kHz |
| Frequency Range: |
20 Hz - 20 kHz, +/- 0.25 dB,
< 10 Hz - 50 kHz +0/-3 dB @ 96 kHz |
| Common Mode Rejection (CMR): |
>82 dB typical |
| Total Harmonic Distortion + Noise (THD+N): |
.004% @ +4 dBu, 1 kHz |
| Data Acquisition: |
Eight channel, 12 bit Analog to Digital Converter running at 100 K samples per second. |
| Input/Output Monitor Accuracy: |
Typically ±1 dB |
| Total System SNR: |
(PIP input to amp output): >104dB A-weighted |
