CROWN CTS3000LITE 2 Channel Amplifier Com-Tech Series 3000 Watt 8Ohm Mono 70V PIP2 Compatible

The Crown’s CTs Series amplifiers provide exceptional performance, flexibility and value for installed sound applications.  CTs Series amplifiers feature independent selection of high and low impedance operation for a specific channel, plus power levels and features that were carefully chosen to match the requirements of fixed install design.  Easy integration with HiQnet™ and CobraNet™ allows CTs amplifiers to deliver a comprehensive lineup of monitoring and control features along with digital audio transport for an award-winning digital audio solution.

Features:

• High power density
• All two channel models and four channel model in a 2u chassis, eight channel model in a 3u chassis
• Crown switching power supply for lighter weight
• Selectable "constant-voltage" or low-impedance (4/8 ohm) operation per channel on two-channel models, and per channel-pair on four-and eight-channel models
• 100V direct outputs on CTs 2000, CTs 3000, CTs 4200, and CTs 8200
• Legendary Crown class-I (BCA) and AB+B output topologies offer the best in amplifier reliability
• Four- and eight-channel models offer perfect independent power solutions for multi-zoned systems
• "FIT" (Fault Isolation Topology) circuitry on four- and eight-channel models isolates fault conditions without affecting neighboring channels
• Comprehensive array of indicators provide accurate diagnostics
• Two-channel models are fully PIP2-compatible
• Multi-channel models accept MC accessory modules

Specifications 

put Power	2 ohm Dual (Per Channel): 1500W 4 ohm Dual (Per Channel): 1500W 8 ohm Dual (Per Channel): 1250W 16 ohm Dual (Per Channel): 625W 70V Dual (Per Channel): 1500W 100V Dual (Per Channel): 1500W 4 ohm Bridge: 3000W 8 ohm Bridge: 3000W 16 ohm Bridge: 2500W 140V Bridge: 3000W 200V Bridge: 3000W
Damping Factor	10 Hz - 100 Hz:>3000
Input Sensitivity	Switchable: 1.4V(8/4 Ohms) 26 dB Gain: 2.46V(4 Ohm Load) 3.47V (8 Ohm Load) 1.4V(70V)
Input Impedance	10 kOhms balanced(nominal), 5 kOhms unbalanced(nominal)
Gain	71.4:1 (37 dB)
Frequency Response	20 Hz - 20 kHz +/-0.25 dB @ 1 Watt
Signal-to-Noise Ratio	105 dB A-Weighted, below rated power(20 Hz - 20 kHz)
Total Harmonic Distortion (THD)	< 0.35%, at full rated power (20 Hz - 20 kHz)
Input Connections	2 x Balanced 3-Pin Terminal Block Connectors(one per channel)
Output Connectors	1 x 4-Pole Terminal Strip(Ch 1, Ch 2)
Controls Front Panel	1 x Power Switch
Controls (Rear)	1 x Reset Switch 1 x Rotary Channel Level Control(per channel) 1 x 2-Position Operation Mode Switch 1 x Highpass Filter Switch(per channel) 1 x "Y" Input Switch 1 x Interior 3-Position Input Sensitivity Switch(per channel)
Indicators	Front Panel: 1 x Yellow LED Bridge Mode Indicator 1 x Green LED Ready Indicator 3 x Green LED Signal Indicators(per channel) 1 x Red LED Clip Indicator(per channel) 1 x Red LED Thermal Indicator(per channel) 1 x Red LED Fault Indicator 1 x Yellow LED Data Indicator(per channel) 1 x Blue LED Power Indicator Back Panel: No Indicators on Back Panel
Cooling	Continuously Variable Speed Fans Ventilation Grille(Front),Cooling Vents(Back) Front-to-Rear forced airflow
Power Consumption	35 Watts (120 VAC Mains)
Dimensions (WxHxD)	19 x 3.5 x 14.25" (483 x 89 x 362mm)
Weight	27.7 lb (12.6 kg)
Specialties	Variable Speed Fan Cooling Thermal Level Control JTS Limiting Circuitry