CROWN CTS600BLU 2-Channel Power Amplifier
Crown’s CTs Series amplifiers provide exceptional performance, flexibility and value for installed sound applications. CTs Series amplifiers feature independent selection of high and low impedance operation for a specific channel, plus power levels and features that were carefully chosen to match the requirements of fixed install design. Easy integration with HiQnet™ and CobraNet™ allows CTs amplifiers to deliver a comprehensive lineup of monitoring and control features along with digital audio transport for an award-winning digital audio solution.
The BSS & Crown® PIP-BLU is a PIPTM (Programmable Input Processor) input module for CTs 2 Channel Amplifiers (CTs 600,1200, 2000, 3000). It connects the amplifier to a 100 Mb Ethernet network allowing it to be remotely controlled and monitored using HiQnetTM London Architect as well as providing digital audio transport via BLU link.
The PIP-BLU offers 2 channels of audio via the Soundweb London digital audio bus informally known as BLU Link. This high bandwidth digital audio bus provides easy connectivity with fault tolerance. BLU link features a low latency, fault tolerant digital audio bus of 256 channels which uses standard Category 5e cabling giving a distance of 100m between compatible devices. The BSS Audio MC-1 fiber optic media converter can be used to increase the distance between devices to over 10km (6.2 miles) using single mode fiber.
The PIP-BLU allows for both BLU link and analog input and output. This allows for analog audio to be used as a backup as well as being distributed to additional amplifiers. The ability to listen to the output via BLU link also allows for confidence monitoring.
The audio path in the PIP-BLU is designed to match the standard Smart-AmpTM feature set available in the PIP-Lite module and MacroTech I Series amplifiers. These features include input compressors, multimode output limiters, error reporting and load monitoring. These features are designed to allow for protection of your speakers while the processing is done upstream.
The PIP-BLU is a HiQnet component. This means it connects to a HiQnet system via 100 Mb Ethernet. With HiQnet, a control system of any size can be interconnected using standard 100 Mb Ethernet components (Switches, Network Interface Card, and cables). The control portion of the PIP-BLU can also be connected to a CobraNetTM network to allow for easy network creation.
- High power density. All two channel models and four channel model in a 2RU chassis, eight channel model in a 3RU chassis
- Crown Switching Power Supply for lighter weight
- Selectable "Constant-Voltage" or low-impedance (4/8 ohm) operation per channel on 2-channel models, and per channel-pair on 4-and 8-channel models
- 100V direct outputs on CTs 2000, CTs 3000, CTs 4200, and CTs 8200
- Legendary Crown class-I (BCA) and AB+B output topologies offer the best in amplifier reliability
- 4- and 8-channel models offer perfect independent power solutions for multi-zoned systems· "FIT" (Fault Isolation Topology) circuitry on 4- and 8-channel models isolates fault conditions without affecting neighboring channels
- Comprehensive array of indicators provide accurate diagnostics
- Two-channel models are fully PIP2-compatible. Multi-channel models accept MC accessory modules.
- Digital Audio Transport via BLU link
- Programmable Input Processor with HiQnet Control
- Remote control and monitoring of CTs 2 channel amplifiers
- 2 analog line level inputs and outputs for 2 x 2 BLU link I/O expansion
- Five Year, No-Fault, Fully Transferable Warranty completely protects your investment and guarantees its specifications
- Implements SmartAmpTM features
- • Input compressors
- • Multimode output limiters
- • Error reporting
- • Real time load monitoring
Channels |
2 |
Frequency Response |
± 0.25 dB (at 1 watt, 20 Hz - 20 kHz) |
Signal to Noise Ratio |
< 105 dB (ref. rated power, 20 Hz to 20 kHz, A-weighted) |
Total Harmonic Distortion |
< 0.1% |
Intermodulation Distortion |
< 0.1% |
Damping Factor: 10 Hz to 100 Hz |
> 3000 |
Crosstalk 20 Hz to 1kHz |
> 80 dB (below rated power) |
Common Mode Rejection |
50 dB |
DC Output Offset |
< 2 mV |
Input Impedance |
10 k ohms,5 k ohms (nominally balanced, nominally unbalanced) |
Required AC Mains (+15%, - 25%) |
120V/60 Hz, 230V/50 Hz |
Power Draw at Idle (120 VAC mains) |
24W (Standby Mode) |
Overall Group Delay |
< 120 microsec |
Cooling |
Continuously variable speed forced air, front-to-back airflow |
Power Rating |
2-ohm dual (per ch.): 150W
4-ohm dual (per ch.): 300W
8-ohm dual (per ch.): 300W
16-ohm dual (per ch.): 300W
70V dual (per ch.): 300W
100V dual (per ch.): 300W
4-ohm bridge: 300W
8-ohm bridge: 600W
16-ohm bridge: 600W
140V bridge: 600W
200V bridge: 600W |
Dimensions (W x H x D) |
19 x 3.5 x 14.25 in / 48.3 x 8.9 x 36.2 cm |
Weight |
22.8 lb (10.3 kg) |