MACKIE PPM1008 เพาเวอร์ มิกเซอร์ 800W + 800W Undeniable Power
The Mackie PPM1008 8-Channel Professional Powered Mixer features two built-in amplifiers that deliver a powerful 1600W (peak) to passive loud speakers. The mixer is a perfect match with Mackie passive loud speakers such as the C300 or S215 models.
A total of 8-channels is comprised of 4 mono line, 2 line / DI switchable, and 2 stereo channels. The first four channels feature XLR microphone inputs with phantom power, and channels 5 and 6 feature DI instrument inputs for direct connection of guitars.
Built-in compression dials are featured on channels 1 through 4 for easy on-touch compression setting. The Running Man 32-bit effects processor delivers “gig ready” usable effects presets that include plate reverb, room reverb presets, chorus settings and delays.
A full 3-band EQ section with mid-range sweep is featured on all mono inputs and two 9-band graphic EQ sections provide additional frequency contouring on output. The PPM1008 is designed for rigorous road use with built-in handles, rounded front chassis and ABS construction. The PPM1008 features the routing, features, sound quality, power and ruggedness expected for sound reinforcement on-the-go.
Features:
- 800+800W Peak
- 8-Channels
- 32-Bit “Gig Ready” Effects
- Built-In Compression
- Built-In Instrument Inputs
- Ultra Lightweight
- 3-Band EQ with Sweep
- Dual 9-Band Graphic EQ
Specifications
Power Rating |
800+800W Peak |
Mic/Line Inputs |
3-pin XLR Microphone x8
1/4″ Phone Mono Line x4
L/R Stereo 1/4″ Phone Line x2
L/R Stereo RCA Phono Line x2
1/4″ Phone Mono Line/Instrument x2 |
Mains Inputs |
Unbalanced 1/4″ Phone A/B x2 |
In-Line Inputs/Returns |
No |
Aux Sends |
MON1 Send – 1/4″ Phone
FX/MON2 Send – 1/4″ Phone |
Aux Returns |
No |
Inserts |
1/4″ TRS Phone
All Mono and Instrument / Line Inputs |
BUS (Group) Outputs |
MAIN Left/Right – L/R Stereo 1/4″ Phone |
Main Output |
Speaker Outputs – A/B Speakon and 1/4″ Phone Connectors |
Tape I/O |
L/R RCA Phono |
Monitor Outputs |
MON1 Send – 1/4″ Phone
FX/MON2 Send – 1/4″ Phone |
EQ Section |
Channel EQ
High Shelving: +/- 15dB @ 12kHz
Mid Peak Sweep (Mono chs): +/- 15dB
Mid Sweep Range: 100Hz to 8kHz
Hi Mid Peaking (Stereo chs): +/- 15dB @ 2.5kHz
Lo Mid Peaking (Stereo chs): +/- 15dB @ 400kHz
Low Shelving: +/- 15dB @ 80Hz
9-Band Graphic EQ
Main and Monitor 1: +/- 15dB @ 63, 125, 250, 500, 1k, 2k, 4k, 8k and 16kHz |
Solo/Mute |
No |
Channel Level Control |
Rotating Pot Controls |
Trim/Gain Control |
Rotating Pot Controls |
Phantom Power |
+48V |
Metering |
Stereo Peak LEDs |
Frequency Response |
Mic Mono Inputs: < 10Hz to 80kHz
Line Mono Inputs: < 10Hz to 40kHz
Line Stereo Inputs: < 10Hz to 75kHz |
Signal-to-Noise Ratio |
-128dBu |
Total Harmonic Distortion (THD) |
Mic Mono: < 0.007% High Gain
Mic Mono: < 0.005% Low Gain
Line Mono: < 0.005% Low Gain
Line Stereo: < 0.01% at Main Out |
Power Supply |
120VAC 50/60Hz
680W |
Dimensions (HxWxD) |
12.3 x 19.3 x 11.4″ (314 x 490 x 290mm) |
Weight |
24.5 lb (11.1kg) |