Display |
Screen Size |
48-inch (1209 mm) |
Panel Type |
VA Panel/D-LED |
Aspect Ratio |
16:9 |
Effective Display Area |
1054 x 592 mm |
(W x H) |
(41.4″ x 23,3″) |
Number of Pixels (H x V) |
1920 x 1080 pixels |
Brightness (Typ) |
350 cd/m2 |
Contrast Ratio |
4000:1 |
Response Time |
8.0 ms (G to G) |
Viewing Angle (Horizontal/Vertical) |
178°/178°
(CR≥20) |
Connection Terminal |
VIDEO IN |
4-pole mini jack (M3) x 1 |
HDMI In |
HDMI TYPE-A connector x 2 * VIERA LINK is not supported. |
DVI-D In/Audio In (L/R) |
DVI-D 24-pin x 1/Stereo Mini Jack (M3) x 1 (Shared with PC In) |
PC In/Audio In (L/R) |
Mini D-sub 15-pin x 1/Stereo Mini Jack (M3) x 1 (Shared with DVI-D In) |
USB |
USB connector (TYPE A) x 1, DC 5V/1A * USB 3.0 is not supported. |
Control |
Serial |
D-sub 9-pin x 1, RS-232C Compatible |
LAN |
RJ45 x 1 10 BASE-T/100BASE-TX, Compatible with PJLink™ |
IR In/Out |
Mini Jack (M3) x 1/ x 1 |
Audio |
Audio Out |
Stereo Mini Jack (M3) x 1 |
Built-in Speaker |
20 W [10 W + 10 W] (10% THD) |
Electrical |
Power Requirements |
110-127/220-240 V AC, 50/60 Hz |
Power Consumption |
150 W |
On Mode Average Power Consumption*1 |
105 W |
Power off Condition |
Approx. 0.3 W |
Stand-by Condition |
Approx. 0.5 W |
Mechanical |
Dimensions (W x H x D) |
1082 x 624 x 62 mm (42.6″ x 24.6″ x 2.5″) |
Bezel Width |
11.9 mm (0.47″ ) (L/R/T), 14.7 mm (0.58″) (B) |
Weight |
Approx. 11.5 kg
(25.4 lbs.) |
Pitch of Wall-hanging |
VESA Compliant 200 x 200 mm
(7.9″ x 7.9″) |
Installation Requirement |
Orientation |
Landscape / Portrait |
Tilting Angle |
0-20 degrees forward with landscape setting*2 |
Operating Environment |
Temperature: 0°C to 40 °C (32 °F to 104 °F)*3 / Humidity: 20 % to 80 % (Non Condensation)*4 |
NOTE |
*1 Based on IEC 62087 Ed.2 measurement method.
*2 Please contact your sales representative with regard to the tilt angle before installation.
*3 Environmental temperature to use this unit at high altitudes (1400 m (4593 ft) and higher and below 2800 m (9186 ft) above sea level): 0 °C to 35 °C (32 °F to 95°F)
*4 Depending on the temperature or humidity conditions, uneven brightness may be observed. This is not a malfunction.
• This unevenness will disappear while applying current continuously. If not, consult the distributor. |