| SPECIFICATIONS |
Standard |
- |
| Modulation |
- |
| Transmission Speed |
- |
| Frequency Range |
- |
| Access Method |
- |
| Security |
- |
| SYSTEM REQUIREMENTS |
OS |
- |
| CPU |
- |
| Memory |
- |
| SCANNING FREQUENCY |
HDM |
f H : 27 - 99 kHz, f V : 24 - 119.8 Hz
Dot clock: 25.2 - 162 MHz |
| DVI-D |
- |
| RGB |
f H : 15.6 - 99 kHz, f V : 24 - 119.8 Hz
Dot clock: 13.5 - 162 MHz |
| YP B P R (YC B C R) |
f H : 15.75 kHz, f V : 60 Hz [480i (525i)]
f H : 15.63 kHz, f V : 50 Hz [576i (625i)
f H : 31.50 kHz, f V : 60 Hz [480p (525p)]
f H : 31.25 kHz, f V : 50 Hz [576p (625p)]
f H : 45.00 kHz, f V : 60 Hz [720 (750)/60p]
f H : 37.50 kHz, f V : 50 Hz [720 (750)/50p]
f H : 33.75 kHz, f V : 60 Hz [1035/60i]
f H : 28.13 kHz, f V : 50 Hz [1080 (1125)/50i]
f H : 28.13 kHz, f V : 25 Hz [1080 (1125)/25p]
f H : 27.00 kHz, f V : 24 Hz [1080 (1125)/24p]
f H : 33.75 kHz, f V : 30 Hz [1080 (1125)/30p]
f H : 67.50 kHz, f V : 60 Hz [1080 (1125)/60p]
f H : 56.25 kHz, f V : 50 Hz [1080 (1125)/50p] |
| Video / S-Video |
f H : 15.75 kHz, f V : 60 Hz [NTSC / NTSC4.43 / PAL-M / PAL60]
f H : 15.63 kHz, f V : 50 Hz [PAL / PAL-N / SECAM] |
| TERMINALS |
HDMI IN |
HDMI 19-pin × 1, Deep Colour, HDCP compatible
480p (576p), 576p (625p), 720 (750)/60p, 720 (750)/50p, 1080 (1125)/60i, 1080 (1125)/50i, 1080 (1125)/24p, 1080/25p, 1080 (1125)/30p, 1080 (1125)/60p, 1080 (1125)/50p,
VGA (640 × 480) – WUXGA (1920 × 1200), Audio signal: linear PCM
(sampling frequencies: 48 kHz, 44.1 kHz, 32 kHz) |
| Computer 1 IN - RGB |
D-sub HD 15-pin
R: 0.7 Vp-p, 75 ohms
G: 0.7 Vp-p (G: 1.0 Vp-p for sync on G), 75 ohms
B: 0.7 Vp-p, 75 ohms
HD / VD, SYNC: High impedance, TTL (positive / negative)
Note: HD / SYNC, and VD terminals do not accept tri-level sync signals |
| Computer 1 IN - YP B P R (YC B C R) |
Y: 1.0 Vp-p (including sync signal), P B / P R (C B / C R ): 0.7 Vp-p, 75 ohms |
Computer (RGB) 2 IN / 1 OUT
R, G, B |
D-sub HD 15-pin
R: 0.7 Vp-p, 75 ohms
G: 0.7 Vp-p (G: 1.0 Vp-p for sync on G), 75 ohms
B: 0.7 Vp-p, 75 ohms
HD / VD, SYNC: High impedance, TTL (positive / negative)
Note: HD / SYNC, and VD terminals do not accept tri-level sync signals |
| Video IN |
RCA pin x 1, 1.0 Vp-p, 75 ohms |
| Video OUT |
- |
| S-Video IN |
Mini DIN 4-pin x 1, Y: 1.0 Vp-p; C: 0.286 Vp-p, 75 ohms |
| Audio IN |
M3 (L, R) x 1, 0.5 Vrms |
| Audio OUT |
M3 (L, R) x 1 |
| Monitor OUT |
0 - 2.0 Vrms, variable |
| Serial IN |
D-sub 9-pin × 1 for external control (RS-232C compliant) |
| Serial OUT |
- |
| Remote IN |
D-sub 9-pin × 1 for external control (parallel) |
| Remote OUT |
- |
| LAN |
RJ-45 × 1 for network connection, 100Base-TX / 10Base-T |
| Digital Link |
RJ-45 x 1, for Digital Link connection |
| USB |
- |
| POWER |
Power Supply (V) |
16 DC (DC input connector) |
| Power Consumption (W) |
16
0.2 with Power Off, including the power consumption of AC adaptor |
| AC Adaptor |
Input: 100 - 240V AC, 1.5 - 0.8 A, 50 / 60 Hz
Output: 16V DC, 3.75 A |
| GENERAL |
Dimensions - W x H x D (mm) |
210 x 44 x 250 (protruding parts not included) |
| Weight (kg) |
Main Unit: Approx. 1.15
AC Adaptor: Approx. 0.2 |
| Operating Temperature (o C) |
0 - 40 |
| Operating Humidity (%) |
20 - 80 (no condensation) |
| Applicable Projector |
PT-VW431D |
| Applicable Projector when the ET-WM200 is attached |
- |
| ACCESSORIES |
Standard |
AC Adaptor
Power Cord (2m x 3)
AC Power Cord Holder
Mounting Brackets for Rack or Countertop Installation (x 2)
Mounting Bracket for Rack Installation
Countersunk Screws (x 6)
Legs (x 4)
Screws for Installing Legs (x 4) |
| Optional |
- |
