Sanyo PLC-XD2200 เครื่องฉาย โปรเจคเตอร์ Projector 2200 ANSI Lumens 1024 x 768 XGA
** สินค้า Sanyo หมดทุกรุ่นครับ แนะนำเป็นยี่ห้อ Panasonic ครับ**
Sanyo PLC-XD2200 Key Features
- Designed for Education
- LCD Display system
- 2200 ANSI Lumens
- XGA 1024*768 Native Resolution
- 4000 hour lamp life (typical)
- 500:1 Contrast Ratio
- Network Ready
- Monitor Out
- 2.6kg (5.7lb.)
- Quick Power On
- Quick Power Off
- Logo Capture and Display
Feature
Main Features
Long life lamp
Lamp life in Eco mode has been extended to 6,000 hours*, twice as long as the conventional model. A longer lamp replacement cycle means lower running costs.
*The lamp replacement cycle is an estimate, not guaranteed.
It is subject to change according to the use conditions.
Enviroment friendly power consumption in standby mode (Eco): 0.4 W (100-120 V) /0.7 W (200-240 V)
SANYO's ecological data projector with 0.4 W (100-120 V) / 0.7 W (200-240 W) standby power consumption*1. By redesigning electrical circuits, a standby power consumption savings of about 80 % was achieved compared to a conventional model. These products conform with the EuP-Directive Lot 6*2, and the EU RoHS Directive*3
*1 When Standby mode: "Eco" is selected
*2 A directive of the EU that requires environmental design features for energy-using products (EuP)
*3 The Restriction of the Use of Certain Hazardous Substances in Electrical and Electronic Equipment Regulations
Easy Setup Function
PLC-XD2600 / XD2200 provides "Auto Setup Function" that corrects vertical shape distortion by searching for an input signal and detecting projector incline, reducing setup time. Furthermore, the "Screen Guidance Function" allows projector set up according to the displayed guidance. This function provides all an easy guide to projection.
Wired LAN (RJ-45) for projector control
This model is equipped with Wired LAN (RJ-45) that allows you to manage and control projector via Network. It is possible to check the operating time of lamp and manage the warning notification by Email. Power ON/ OFF and switching of input signal can be controlled. You can save a lot of time about manage and control.
*Images cannot be transmitted via network
Light Weight and Compactness for Greater Portability
The compact design (W 333.5 x H 85.2 x D 247.0 mm (13.1 x 3.4 x 9.7 inch)*) and light weight body (2.6kg (5.5 lbs) ) let you make presentations almost anywhere.
* Not including protruding parts.
Bright Images Even In a Well-Lit Room
The PLC-XD2600 provides outstanding brightness of 2,600 lumens, while the PLC-XD2200 delivers 2,200 lumens of brightness.
Direct off Function
The projector can be turned off by unplugging the cable without pressing the power button. You can pack up and leave quickly.
[Other Features]
· D-sub 15pin for Input, D-sub 15pin for Input or Monitor out
· Operation menu: 20 languages
· Color board (4 color) mode, Security: PIN code lock, Key lock
Model name |
PLC-XD2600 |
PLC-XD2200 |
Panel |
0.55 inch TFT p-Si x 3 |
No. of pixels |
2,359,296 (1024 x 768 dots x 3) |
Projection lamp |
215 W UHP |
Brightness*1 |
2600 lm |
2200 lm |
Contrast*1 |
500 : 1 |
Uniformity*1 |
85% (corner to center) |
Projection lens |
F2.0 - 2.15, f = 18.38 - 22.06 mm (0.72 - 0.87 inch) |
Screen size |
40" - 300", 1.3 m (wide) - 11.8 m (tele) (4.3 - 38.7 ft), U:D = 6:1 |
Zoom / Focus |
1:1.2 Manual driven |
SD/HDTV signals |
480i, 480p, 575i, 575p, 720p, 1035i and 1080i |
Color systems |
PAL / SECAM/ NTSC / NTSC4.43 / PAL-M/N |
Video Signal |
Composite, S-Video, Component |
Computer Terminal |
D-sub 15 x 1 : Analog RGB Input
(Component and S-video input with conversion cable)
D-sub 15 x 1 : Analog RGB Input or Monitor out*2 |
Video terminal |
RCA x 1 ; Composite video |
Computer compatibility |
WUXGA / UXGA / WXGA / SXGA+ / SXGA / XGA / SVGA / VGA / MAC |
Audio |
Mini-Jack (stereo) x 1 : Input (for Computer)
2 RCA (L, R) x 1 (Video)
Mini-Jack (stereo) x 1 : Output (variable audio out) |
Communication Terminal |
RJ-45 (LAN), D-sub 9pin (RS 232C) |
Presentation Tool |
Freeze / Digital Zoom / No Show / etc |
Other Feature |
Progressive, 3-2 & 2-2 pull down, User Logo |
Scanning frequency (Input) |
H sync: 15 - 100 kHz, V sync: 50 - 100 Hz, Dot clock 140 MHz |
Sound output |
1.0W Mono |
Fan Noize |
29dBA (Lamp mode "Eco") |
Voltage |
AC 100 - 120V, AC200 - 240V, 50/60Hz |
Power
consumption |
100-120 V |
192 W / 266 W / 284 W
( Eco / Normal / High) |
186 W / 230 W / 261 W
( Eco / Normal / High) |
200-240 V |
183 W / 248 W / 268 W
( Eco / Normal / High) |
181 W / 218 W / 247 W
( Eco / Normal / High) |
Standby power
consumption |
100-120 V 0.4 W (Standby mode: Eco)
200-240 V 0.7 W (Standby mode: Eco) |
Dimensions*3 |
W333.5 x H85.2 x D247.0 mm (W13.1 x H3.4 x D9.7 inch) |
Weight |
2.6 kg (5.7 lbs) |
Accessory |
Quick reference guide, Owner's manual (CD-ROM), CD-ROM read me note, PIN code Label, Lamp replacement label, UL cable card, Power cord, Computer cable (Dsub15-Dsub15), Remote control, AAA Battery x 2, Lens cap, Strap for lens cap |
Replacement Lamp Type No.:POA-LMP142
*1 Measurement, measuring conditions, and method of notation all comply with ISO 21118 international standards. Lamp mode: "High" & Image mode: "Dynamic"
*2 For analog RGB signal only, limitations on certain output signals. Does not support all types of input signals.
*3 Not including protruding parts.
* Product appearance and specifications are subject to change without notice.
* All product names and company names are trademarks or registered trademarks of their respective companies.
Approximate throw distance/picture size