AKG DMM4/2/2 Digital automatic microphone mixer for 4 microphone and 2 AUX inputs, recording out and master out; including central control concept
HELPING HAND
for houses of worship, conferences and courtrooms
The DMM4/2/2 is a high-performance digital automatic mixer with four balanced microphone inputs, two AUX inputs and one mono master output. The mixer offers an intelligent mixing algorithm for seamless mixing including a ducking function. Each input channel features low-cut, LF and HF shelving filters, a dbx® compressor/limiter, switchable input gain (Mic/Line, Mic-Lo/Mic-Hi), switchable phantom power and an incremental level control with LED level and peak hold display.
Multiple DMM4/2/2 mixers can be daisy-chained for larger systems. A rear-panel control I/O port provides logic inputs and outputs for controlling external devices.
Intelligent automatic mixing
for smooth and discreet operation
One mono master output
via a professional XLR connector
Four balanced microphone inputs
via professional XLR connectors
Two unbalanced AUX inputs
via standard RCA connectors
Full digital signal processing per channel
including dbx® compressor/limiter
TECHNICAL SPECIFICATION
General |
Bits |
24 |
Operating temperature range |
5 to 45 Celsius |
Sampling Rate |
48 Hz |
|
Input 1 |
Audio Frequency bandwidth |
20 to 16000 Hz |
Nominal level |
-60 dB |
Type |
Balanced XLR |
Maximum audio level |
15 dB |
Amount |
4 |
Contacts |
3-pin |
Gender |
Female |
Note |
Mic/Line audio input with 48V DC phantom power |
|
Input 2 |
Audio Frequency bandwidth |
20 to 22000 Hz |
Maximum audio level |
15 dB |
Type |
RCA/Cinch |
Amount |
2 |
Contacts |
2-pin |
Note |
AUX audio inputs |
|
Output 1 |
Audio Frequency bandwidth |
20 to 20000 Hz |
Type |
Balanced XLR |
Maximum audio level |
10 dB |
Amount |
1 |
Contacts |
3-pin |
Gender |
Male |
Note |
Line mono audio output |
|
Output 2 |
Amount |
2 |
Audio Frequency bandwidth |
20 to 20000 Hz |
Contacts |
3-pin |
Gender |
Female |
Maximum audio level |
10 dB |
Note |
Recording audio output (left and right) |
Type |
RCA/Cinch |
|
Control interface |
Amount |
1 |
Note |
I/Os on a 26 pin Sub-D connector for remote control via logic contacts and VCA |
|
Powering |
Type |
IEC Socket |
Voltage |
100 to 240 V |
Internal Power Supply |
yes |
|
Design |
|
Weight/Dimensions |
Length |
483 mm |
Width |
203 mm |
Height |
44 mm |
Net Weight |
3.5 g |
|