BIAMP AudiaFLEX CM AudiaFLEX chassis with CobraNet™ Module, 2RU

AudiaFLEX is an expanded version of Audia,® the benchmark in digital audio systems for demanding professional sound installations. AudiaFLEX provides the same easy-to-use software and functional algorithms, but with far greater flexibility in the choice of I/O configurations. Inputs and outputs may be specified by pairs, in any combination, up to a total of 24. All possible I/O configurations are available with or without CobraNet,® for multi-device or stand-alone systems. The intuitive software provides audio system design capabilities via PC computer, and allows easy selection, viewing, and calibration of numerous audio components: mixers, combiners, matrixes, equalizers, filters, crossovers, dynamics, routers, delays, remote controls, meters, generators, diagnostics, etc.  Once a system design is compiled, it is downloaded into AudiaFLEX, where it can then be controlled via third-party systems such as AMX®and Crestron,® via daVinci™ software, and/or via dedicated Audia remote control panels.

Product Features

• Up to 24 inputs/outputs, with or without CobraNet
• Input (IP-2), echo canceling (AEC-2HD), telephone (TI-2), output (OP-2e), & amplifier (PA-2) cards
• Input and output expanders (8-channel/CobraNet)
• On-screen display of the total audio design
• Configuration/control via PC/laptop (Ethernet)
• Third-party control via RS-232 or TCP/IP
• Remote control panels for levels, presets, etc.
• Built-in diagnostic tools
• Multi-level security coding
• Unlimited system size
• RoHS compliance and AES grounding practices
• CE marked and UL/C-UL listed
• Covered by Biamp Systems’ five-year warranty

Product Specifications

• Frequency Response (20Hz~20kHz @ +4dBu): +0/-0.4dB
• THD+N (20Hz~20kHz @ +4dBu): line level: < 0.006%. mic level: < 0.04%
• Equivalent Input Noise (20Hz~20kHz, 66dB gain, 150 ohm): -125dBu
• Dynamic Range (20Hz~20kHz, 0dB): > 107dB
• Maximum Gain (input channels): 66dB
• Crosstalk (channel-to-channel @ 1kHz): line level: < -80dB. mic level: < -75dB
• Output Impedance (balanced): 200 ohms
• Input Impedance (mic/line balanced): 8k ohms
• Maximum Output (balanced): +24dBu
• Maximum Input (mic/line): +24dBu
• Phantom Power: +48 VDC (7mA/input)
• Input Gain Range (variable trim): 0dB ~ +66dB
• Sampling Rate: 48kHz
• A/D - D/A Converters: 24-bit
• Power Consumption (100~240VAC 50/60Hz): < 150 watts
• Dimensions: height: 3.5 inches (89mm). width: 19 inches (483mm). depth: 11.15 inches (283mm)
• Weight (max. - fully loaded with PA-2 cards): 15.25 lbs. (6.9kg)