**สินค้าตกรุ่นครับ**
dbx GoRack Portable Performance Processor
เครื่องปรับแต่งเสียง DBX GORACK PERFORMANCE PROCESSOR เป็นอุปกรณ์สำหรับปรับแต่งเสียงแบบดิจิตอล
PROFESSIONAL AUDIO WHEREVER THE PERFORMANCE TAKES YOU
Historically, the convenience of portability in a PA System has meant a compromise in sound quality and fidelity. To answer that call, we at dbx Professional Products are proud to introduce the all-new goRack™ Portable Performance Processor. The goRack is an easy-to-use portable speaker processor. Based on our industry-leading DriveRack® Series, the goRack sits next to a set of powered speakers and provides powerful signal processing including Anti-Feedback (based on our AFS™ Advanced Feedback Suppression algorithm), Compression, Sub-Harmonic Synth and EQ. Each processing function can easily be enabled or disabled via top-level function buttons, and settings can be adjusted via goRack’s large data wheel.
goRack’s rear panel features combination 1/4”/XLR inputs that can be connected to either mixer outputs or microphones. When using a mic, the goRack's Mic/Line switch selects the proper input sensitivity and gain range while dual gain controls on the top provide independent level adjustment. goRack’s 1/8” Aux input allows for direct connection of mobile music players while XLR outputs interface with powered speakers.
The goRack represents the best of dbx’s DriveRack processing in its purest, most simplified form all housed in a sleek, compact form factor that fits in your hand, or back pocket. The goRack is perfect for applications from a mixer, or with its dual XLR inputs and Aux input, it can be used as a standalone performance processor/mixer for the solo artist.
Features
- Compact Form Factor
- Anti-Feedback Processing based on the dbx AFS™ (Advanced Feedback Suppression) algorithm
- dbx Compression (based on the dbx 163)
- Subharmonic Synthesis
- EQ (16 Musical Genre-Based 31-Band Graphic EQ Settings)
- Dual dbx Microphone Preamp/Line Inputs
- Selectable Mic/Line Input Settings
- Stereo Inputs and Outputs
- Combination Mic/Line Input Jacks and XLR Outputs
- 1/8" Stereo Aux Input for Mobile Music Players/Devices
- Independent Left and Right Channel Volume Controls
Specifications
Mic/Line Inputs |
2, independently switchable between mic or line level |
Mic/Line Input Connectors |
Female ¼” - XLR combination |
Mic/Line Input Type |
Electronically balanced, RF filtered |
Mic/Line Input Impedance |
Switch set to MIC: 2 kΩ balanced, Switch set to LINE: 22 kΩ balanced |
Mic/Line Input Max. Gain |
Switch set to MIC: 48 dB, Switch set to LINE: 5 dB |
Mic/Line Input Max. Input Level |
Switch set to MIC: 0 dBu, Switch set to LINE: +20 dBu |
Mic/Line Input CMRR |
> 45 dB |
Aux Input |
1 |
Aux Input Connector |
Female stereo 1/8” (3.5 mm) TRS mini |
Aux Input Type |
Unbalanced, RF filtered |
Aux Input Impedance |
20 kΩ |
Aux Input Max. Input Level |
+20 dBu |
Outputs |
2 line outputs |
Output Connectors |
Male XLR |
Output Type |
Impedance balanced, RF filtered |
Output Impedance |
40 Ω |
Maximum Output Level |
+14 dBu |
Mic/Line A/D and D/A Converters |
24-bit |
Mic/Line A/D and D/A Dynamic Range |
115 dB A-weighted |
Aux Input D/A Converter |
24-bit |
Aux Input D/A Dynamic Range |
106 dB A-weighted |
Internal Processing Wordlength |
32-bit floating point |
Sample Rate |
48 kHz |
Dynamic Range |
103.5 dB A-weighted, 102.5 dB unweighted |
THD+Noise |
0.04% typical at 0 dBu in/out, 1 kHz |
Frequency Response |
20 Hz – 20 kHz, +0 /- 0.5 dB |
Latency |
< -80 dB, -84 dB typical |
Power Supply |
PS0913DC-04 (9 VDC) |
Operating Voltage |
100-240 VAC, 50/60 Hz |
Power Consumption |
4.5 Watts (500 mA) |
Unit Weight |
1.2 lbs. (0.54 kg) |
Shipping Weight |
2.04 lbs. (0.93 kg) |
Dimensions |
6.1” (L) x 4.1” (W) x 1.69” (H), 154.9 mm (L) x 104.1 mm (W) x 42.9 mm (H) |