TANNOY SC1- Controller เครืองมือช่วยปรับแต่งเสียง Controller, 2in/6out
A powerful 2-in 6-out digital system controller, the VNET SC1 combines the functions of multiple conventional processing products into a compact 1RU of space. Using DSP-enabled digital crossovers with 96kHz sampling rates this versatile, feature-packed unit will enable simple configuration and optimization of loudspeakers for superior audio quality within a fixed installation or touring situation.
The SC1 features crossover, EQ, delay and limiting functions, and is also equipped with two network ports allowing connection to any networked system using any number and combination of the other products in the VNET range.
FEATURES
Set up of the unit is exceptionally simple thanks to the intuitive signal flow based interface, with programmed settings clearly displayed on the 2 x 16 character back light LCD. The function buttons and input level meters are also backlit; allowing ease of use even in subdued lighting conditions.
Each input on the network enabled VNET SC1 has gain control and 4 bands of parametric EQ with bands 1 and 4 offering settings for LF and HF shelving response. The unique routing engine will allow any input to be sent to any output. Butterworth, Bessel and Linkwitz Riley type filters are available on all outputs which can be configured as 2, 3 or 4-way crossovers. All output channels feature an independent speaker alignment delay (200 ms per channel) and a 4 band parametric EQ for speaker management. Four high performance limiters offer a wide range of control over Attach, Release and Threshold parameters.
The VNET SC1 can be linked via RS232 to a laptop computer or other PC and controlled using VNET software to provide improved access to the configuration functionality via simple on-screen graphics. The two input and six output connections are via balanced XLR sockets.
SPECIFICATIONS
General
- Inputs: 2
- Input Impedance: >10k Ohm, electronically balanced
- Maximum Input Level: +20dBu
- Outputs: 6
- Output Impedance: <100 Ohm, ground balanced
- Maximum Output Level: +20dBu into 600 Ohm load
- Sample Rate: 96kHz
- Bit Depth: 24 bit
- Frequency Response: 10Hz to 40kHz, +/-3dB (filters disabled) 20Hz to 20kHz, +/- 0.5dB (filters disabled)
- THD: <0.01%, (+10dBu, 20Hz to 20kHz bandwidth) > 109dB (un-weighted, 22kHz bandwidth)
- Serial Comms Data: 38.4kbaud, format: 8 data, 1 stop, no parity
Processing
- Gain: +15dB to -40dB and mute, 0.2dB steps
- Output Ch. Source: Input A, Input B and SUM
- HP filter frequency: Off, 10Hz to 25.4kHz, 1/36 octave steps
- LP / HP filter type: 12, 18 & 24dB/octave Bessel and Butterworth 12, 24 and 48dB/octave Linkwitz Riley 4th or 8th order Hardman
- Delay: Input 400ms, output 80ms
- Limiter: High performance limiter, adjustable threshold in 0.2dB steps, automatic time constants
- EQ Frequency: 10Hz to 25kHz, 1/36 octave steps
- EQ Gain: +15dB to -15dB, 0.2dB steps
- EQ Width: 5.0 to 0.1 octaves bandwidth, 1/36 octave steps
Connectors
- Audio Inputs: 3 pin female XLR
- Audio Outputs: 3 pin male XLR
- Serial Comms: Available via RS232 port
- Network Comms: Yes
Other
- Mains: 3-pin IEC
- Mains Power: Universal switch-mode PSU, 85v to 250v AC, 50/60Hz
- Consumption: <25W
- Dimensions: 1.73" x 18.97" x 10"
- Weight: 5.95lbs