LAX AT110-V2 ลำโพง Single 10" Line Array Speaker
The ATEC series of passive (unpowered) and active (built-in class D amplifiers with DSP), line array speakers was designed to cover a broad range of applications, whilst meeting the critical expectations of the professional target customer; namely, quality and value for money.
The ATEC series is an incredible achievement in an industry where more often than not, solutions are either too expensive, or fail to meet the specifications. We knew that it would be a challenge to build a range of speakers that could tick both boxes; but we did it. The ATEC series offers uncompromised quality, whilst delivering a fantastic return on investment for the end-user.
From the unique design of our newly patented WPD Waveguide, to the special formulation used to produce the low frequency woofer cone, you can rest-assured the ATEC series of Line Arrayspeakers and subwoofers has been designed and engineered to meet the high requirements of system integrators, sound engineers, accountants and end-users everywhere.
Applications
Medium scale venues (stadium, concert hall, auditorium, theatre, clubs), touring show, rental market.
Features
- 2-Way bi-amp line array cabinet
- Single 10" Neodymium woofer with humidity resistant paper cone
- Tuned low frequency phase plug
- Titanium diaphragm with Mylar-edged compression driver
- 100°horizontal dispersion
- 70 Hz - 20 kHz frequency response (@ -10 dB)
- Reinforced V-Slot grille
- Integrated rigging system with 7:1 safety coefficient
Specifications
Frequency Response |
80 Hz - 18 kHz (±3 dB) |
70 Hz - 20 kHz (-10 dB) |
Dispersion (H) |
100° |
Sensitivity (1 W / 1 m)
|
LF: 103 dB HF: 109 dB |
LF Driver |
1 x 10" Neodymium / 65 mm Voice Coil |
HF Driver |
1 x 1.4" Ferrite / 75 mm Voice Coil |
Enclosure |
Phase Inverted |
Fittings |
AT110- V2FK |
SPL (1 m) |
LF: 127 dB (Continuous) / 133 dB (Peak)
HF: 127 dB (Continuous) / 133 dB (Peak)
|
Power Rating (AES) |
LF: 300 W HF: 75 W |
Nominal Impedance |
LF: 16 ohm HF: 16 ohm |
Connectors |
2 x Neutrik® NL4MP
LF: 1+1- HF: 2+2- |
Dimensions (W x D x H) |
641 x 410 x 272 mm |
Net Weight |
23 kg |