P. Audio VITA-6P ลำโพง dual 6 inch line array cabinet
The Vita-6P is a dual 6 inch line array cabinet featuring integrated rigging, neodymium components and switchable bi-amp or passive con?gurations. The complete cabinet impedance is 16 ohms, allowing for high ampli?er density. On a 2 ohm stable ampli?er, 8 cabinets may be linked from a single ampli?er channel allowing an extremely cost effective sound reinforcement solution. The on board passive crossover may be switched in or out, depending on the level of control required. The passive crossover allows ?at frequency response, with a crossover frequency of 2kHz, featuring a 3rd order high pass ?lter for high frequency. If more control and SPL is required, the switch may be used in Bi-Amp con?guration, allowing low and high frequency to be driven from separate ampli?ers, without passing the passive crossover. The 6 inch woofer in Vita-6P is a new design featuring a large neodymium magnet for high motor strength and a speci?cally developed paper cone for accurate vocal performance. This cone allows prominent vocals while retaining relatively high resonance and system ef?ciency. The dual high frequency units feature a 1 inch diaphragm mated directly to the high frequency waveguide without any discontinuities at the horn throat, extending the bandwidth available from the system. The cabinet and rigging is designed to be as simple as possible, featuring a single pin set up at the rear of the cabinet to ?x the angle. The enclosure is constructed from 15mm touring grade plywood, with a highly durable polyurea coating. All of the rigging is made from structural steel, with powder coating to ensure longevity. The Vita-6P cabinet is designed to be used in conjunction with the Vita-15P Sub cabinet for maximum performance, in a ratio of 2 x Vita-6P to 1 x Vita-15P Sub.