QSC HPR122i 12" 2-way Powered Multipurpose Loudspeaker

The HPR122i offers performers and audio professionals the power, technology and legendary reliability of QSC amplification combined with the simplicity and convenience of a multipurpose powered loudspeaker system. Whether your application is vocal reinforcement, dance music, or full tilt rock and roll and whether your need is main PA, or stage monitor, suspended or pole mounted, the HPR122i is your solution. With 131 dB of maximum output the HPR122i outperforms molded plastic box systems without significant additional weight or cost.

A 12" low-frequency woofer with 3" voice coil is powered by 400 watts of class H power. A neodymium magnet design provides ample motor strength for low end performance without adding unnecessary weight. The 1.4" diaphragm neodymium compression driver is powered by a 100 watt, class AB+B amplifier and is loaded on a 75º conical horn. It’s the same high-frequency driver you’ll find on the HPR153F 3-way loudspeaker system.
 

• Ideally suited for use as main PA or monitor
• High continuous power: 500 watts total amplifier power
• 75º conical horn provides predictable coverage regardless of
  cabinet orientation
• Nine (9) M10 suspension points allow for multiple
  suspended applications

HPR122i
SPECIFICATIONS	HPR122i
Configuration	12" 2-way multipurpose powered loudspeaker
Transducers   Low Frequency   High Frequency	12" neodymium transducer with 3" voice coil 1.4" diaphragm compression driver
Frequency Response (-3 dB) 1 Frequency Range (-10 dB) 1	62 Hz - 18 kHz 53 Hz - 22 kHz
Nominal coverage (-6 dB)	75° conical
Maximum SPL (1 meter)	131 dB peak
Amplifier
Power output	400W LF Class H 100W HF Class AB+B
Input impedance	22k balanced 11k unbalanced
Controls	Gain Low-cut filter (Main / Monitor) Front LED On/Off Power Circuit breaker
Indicators	Power Signal Limit
Cooling	Convection
Amplifier protection	Thermal and output power limiting Output short circuit Overtemperature muting Driver DC protection
Current consumption at 120 VAC (1/8 power EIA noise)	1.5A
Enclosure	Painted Birch plywood
Finish	Black textured paint
Grille	Powder coated 16 gauge steel
Suspension/Attachment Points	9 M10 rigging locations
Connectors	Balanced female XLR line level input Balanced male XLR full range line level out
Dimensions	26.9 " H x 14.7 " W x 14.9 " D (683 mm x 373 mm x 379 mm)
Net weight	60 lbs / 27.2 kg
Available Accessories	HPR COVER 122 HPR POLE 31 HPR YOKE 122 HPR M10 KIT HPR SUS KIT 122

¹ Measured in half-space.

Specifications subject to change without notice.