Configuration |
2½ way, biamp or triamp |
Transducers
High Frequency
Low Frequency |
Dual 50 W 8Ω 1-inch exit, 1.75-inch titanium diaphragm, neodymium magnet assembly
Dual 200 W 16Ω 8-inch woofers, 2-inch voice coils, neodymium magnet assemblies, weather resistant cone |
Frequency Response (±3 dB) |
80 Hz - 20 kHz |
Frequency Range (-10 dB) |
68 Hz - 22 kHz |
Nominal Impedance |
HF: 16Ω
LF biamp mode: 8Ω
LF triamp mode: 16Ω (×2) |
Sensitivity |
HF: 106 dB
LF: 97 dB
(4 V @ 1 m) |
Continuous Power Capacity 1
|
HF: 100 W
LF biamp mode: 400 W
LF triamp mode: 200 W (×2) |
Recommended Power |
HF: 200 W
LF biamp mode: 800 W
LF triamp mode: 400 W (×2) |
Maximum Output (dB SPL at 1 m)
Continuous / Peak |
HF: 126 dB / 132 dB
LF: 122 dB / 128 dB |
Nominal Coverage |
Horizontal 140 degrees
Vertical: dependent on number of elements used |
Cabinet Type |
Ported, elliptical / trapezoidal |
Enclosure Material |
HIPS (high impact polystyrene) with UV protectant |
Finish |
Available in black (WL2082-i BLK) or white (WL2082-i WHT) paintable |
Grille |
Perforated, formed aluminum |
Connectors |
2 x NL-8 in parallel |
Pin Outs |
Pins |
Bi-amp |
Tri-amp |
1+/1- |
NC |
NC |
2+/2- |
NC |
LF2 |
3+/3- |
LF |
LF1 |
4+/4- |
HF |
HF |
|
Attachment Points |
Integral, side plate adjustable rigging system, vertical splay adjustable in 1° increments from 0° - 10° |
Dimensions (HWD) inches |
11.8 x 27 x 13.4 |
Dimensions (HWD) mm |
300 x 686 x 340 |
Weight |
37 lb / 16.8 kg net
45 lb / 20.45 kg shipping |
Accessories Available |
FB2082-i: Fly-bar for WL2082-i, WL118-sw and WL115-sw. Available in black or white.
EB2082-i: Extension bar, allows WL118-sw or WL115-sw to be suspended behind WL2082-i. Available in black or white.
PB2082-i: Pullback bar for WL2082-i. Pulls the bottom of the array back to achieve the desired angle. Available in black or white.
AB2082-i: Angle bracket, allows greater vertical splay between WL2082-i and WL118-sw or WL115-sw enclosures in ground stacked configurations. Available in black. Requires two brackets per array, sold individually.
QRP-KIT-1: Kit of four quick-release pins for use in lieu of included bolts. |