Renkus-Heinz IC2-FR ลำโพง IC2 8 Channel Fixed Installation Self-Powered Steerable Array with RHAON
Powerful and versatile, the IC² system's four 8-inchlow frequency Neodymium transducers and four 1-inch throat Titanium Nitride coated HF drivers deliver powerful sound levels that belie their compact size. IC² cabinets can be employed individually as a stand-alone high-performance loudspeaker, ground stacked as a small array, or flown in larger, multi-cabinet arrays for even more output and greater control.
IC2
Digitally Steerable Array Technology
Steerable by ± 30º in the vertical plane - “dead” hang the array and adjust the aiming with the RHAON control software.
Variable Beamwidth Control
Vertical opening angles are adjustable from 10 to 80 degrees per beam, even from a single cabinet. With multiple cabinets beams as tight as 5 degrees can be deployed.
Variable Acoustic Centers
Use a single acoustic center, or employ multiple beams with multiple acoustic centers positioned virtually anywhere within the array.
Self-Powered
Integral DSP controlled 8-channel Class D digital amplifiers provide 60 Hz to 20 kHz high level performance.
Powerful - High Output
A single cabinet can deliver up to 131 dB peak SPL at 1 meter, over 100 dB at 30 meters - and even higher levels from multi-cabinet arrays.
One-Touch Presets - Intuitive Software
RHAON empowered IC2 arrays provide a full set of remote control and supervisory functions, along with the ability to store up to 10 preset setup configurations in memory.
Multiple Inputs - Greater Versatility
IC2 cabinets offer a wide range of inputs; standard analog, AES/EBU serial digital and multi-channel CobraNet digital audio.
Advanced Transducers
Audiophile quality transducers with highly efficient voicecoil and magnet designs ensure that IC2 offers unsurpassed audio quality while offering all the benefits of a high-output steerable array.
Technical Information
|
| Sensitivity: |
|
1.0 V (for rated power output) |
| Freq. Range: |
|
60 Hz to 20 kHz |
| Max SPL: |
|
131 dB peak @ 1 meter
(+ 100 dB peak @ 30 meters) |
| Horiz. Dispersion: |
|
120° (90° optional) |
| Vert. Opening Angles: |
|
10° to 80° (computer adjustable) |
| Aiming Angle: |
|
adjustable from -30° to +30° |
| Beam Control: |
|
Effective down to 800 Hz (Lower when stacked) |
| No. Transducers: |
|
Four 8” audiophile quality cone transducers
Four 1” HF titanium nitride compression drivers |
| No. Amp. Channels: |
|
8 |
| Dimensions: |
|
18.5” H x 28.5” W x 11.25” D
(47 cm x 72.4 cm x 28.6 cm) |
| Weight: |
|
126 Lbs (58 Kg) Net |
| Power Required: |
|
Universal 90/260 VAC, 50/60Hz. 80 VA Idle; 2000 VA @ rated power output |
| Hanging Method: |
|
R-Hang Flying hardware, Metric #10 attachment points. |
| Enclosure: |
|
Finnish Birch, perforated steel grille |
| Inputs: |
|
Analog Audio & AES Inputs: Looping XLR (female in, male out) and Phoenix 6 pin (looping 3-in, 3-out)
CobraNet: Dual RJ45 connectors (for CAT 5e cable) |
| Controls: |
|
Mute button
Up & Down Output Level push buttons
10 dB Input pad (on Analog 1 input)
Push-To-Reset circuit breaker, Preset Selector |
| Computer Controls: |
|
Gain, Mute, On/Standby, Input Selection, Compression, 9-Band Parametric EQ, Shelving & Rolloff Filters, Delay |
| Status Indicators: |
|
Power, Signal, Overdrive, Thermal, Mute, Input Pad, Failure, Digital Readout |
| Power Connector: |
|
Powercon locking connector |
| Finish: |
|
Black or white paint |
| Network Digital Format: |
|
16, 20 or 24 bit PCM; 48 or 96 kHz sample rate; selectable network latency |
|
